2004 LJ In Flux

Been up voting others replies but figure better to also put my opinion out there...

Another no logo vote here. Let word of mouth market for you. My Jeep isn't your free billboard... I have a skid set to go on once I cut out the logo and weld in a flat panel, that's how much I hate a logo.

Can't wait to send you my money when you bring this to market. Especially since Savvy doesn't seem to ever plan to bring theirs back...

Futurama Buy GIF
 
  • Like
Reactions: Fluxor
FarFire70 said:
Another no logo vote here. Let word of mouth market for you. My Jeep isn't your free billboard...
Click to expand...
What is odd and very true is the highly successful parts sellers have figured out how to market products to logo collectors. There are far more buyers of products because they can show off the logo regardless of functionality than there are buyers of products based on functionality regardless of whether it has a logo.
 
  • Like
Reactions: psrivats, Longwhitejeep and B00mb00m
FarFire70 said:
Another no logo vote here. Let word of mouth market for you. My Jeep isn't your free billboard... I have a skid set to go on once I cut out the logo and weld in a flat panel, that's how much I hate a logo.
Click to expand...

Talking about billboards .. you talking about this one below?

I am hoping you would show us photos of how you removed, flattened and repainted it:) It's a jeep, you know it, you bought it, everyone knows it is a jeep, there is nothing else like it, right? :)

1714840273461.png
 
  • Like
Reactions: FarFire70
psrivats said:
Talking about billboards .. you talking about this one below?

I am hoping you would show us photos of how you removed, flattened and repainted it:) It's a jeep, you know it, you bought it, everyone knows it is a jeep, there is nothing else like it, right? :)

View attachment 524095
Click to expand...

And before anyone says anything...it's removable.

PXL_20240504_163532995.jpg
 
  • Like
Reactions: Fluxor, AirborneTexasRanger, FarFire70 and 1 other person
psrivats said:
Talking about billboards .. you talking about this one below?

I am hoping you would show us photos of how you removed, flattened and repainted it:) It's a jeep, you know it, you bought it, everyone knows it is a jeep, there is nothing else like it, right? :)

View attachment 524095
Click to expand...

I’ve always been a fan of running a piece of armor that goes over it. Specifically with the genright highlines so there is no tub lines of where the fender used to sit. Even then you still get the genright logo but I think it still cleans up the side a lot.

IMG_1121.png
 
psrivats said:
Talking about billboards .. you talking about this one below?

I am hoping you would show us photos of how you removed, flattened and repainted it:) It's a jeep, you know it, you bought it, everyone knows it is a jeep, there is nothing else like it, right? :)

View attachment 524095
Click to expand...

A hammer, filler and Paint makes me the ad man I ain't?
 
  • Haha
Reactions: psrivats
The4bangertj said:
I’ve always been a fan of running a piece of armor that goes over it. Specifically with the genright highlines so there is no tub lines of where the fender used to sit. Even then you still get the genright logo but I think it still cleans up the side a lot.
Click to expand...

I see that GR cutout and this is all I can think. If the video doesn't open at the right time stamp ,, watch from 3.20 to 3.45 in the video.


I have the same reaction for the Metalcloak "M" in everything. They used 4 (yes, 4) on their taillights 🤮
 
  • Haha
  • Like
Reactions: Fluxor, rasband, FarFire70 and 1 other person
psrivats said:
Talking about billboards .. you talking about this one below?

I am hoping you would show us photos of how you removed, flattened and repainted it:) It's a jeep, you know it, you bought it, everyone knows it is a jeep, there is nothing else like it, right? :)

View attachment 524095
Click to expand...
I like my Jeep logo
IMG_8199.jpeg
 
  • Like
  • Haha
Reactions: tworley, Fluxor, JMT and 2 others
The4bangertj said:
Holy smokes this is amazing design and work! I’ll definitely be interested in all these products as well. With your aluminum hinges, do they need to be tied into anything like the cage or need aluminum armor to hold up to 35s?
Click to expand...

I don't think tying into the cage adds what we think it would. I considered it. There is a double layer of sheet metal right where the wheel well ties into the corner. I have been running a 35 with no issues. But let me be clear everything can be broken and I would definitely say the strongest recipe includes corner guards and a tailgate skin. This system with corner guards and a tailgate skin makes the factory latch the weak link.
 
  • Like
Reactions: Wildman and The4bangertj
Blake Stamper said:
@Fluxor you get a chance to weight the front bumper?, curious to see how it stacks up against the savvy one.
Click to expand...

No, I forgot this was on my list. I will shoot for tomorrow.

Some of you where asking about LJ corner Blanks. I remember the request being No Wheel Well Cutouts and No Mounting Holes but With Light Holes. Does this ring anyone's bell?
Pic Trimetric .png
 
  • Like
Reactions: JMT, Longwhitejeep, Wildman and 2 others
toximus said:
Are you finally shedding the weight of your sinful steel? 😲
Click to expand...

Not YET.... What would to minions have the mummer about if I was to see the ways of weight lose?

But I need to start gathering parts for the Part Duce of my Facelift...
 
Top Bottom
Back