Latest activity Postings Images About
-
-
707kevin reacted to macleanflood's post in the thread Travelling long distances in a Jeep Wrangler TJ with
Like.
I'm in the middle and have actually done both trips...Fall Creek OR to the Rubicon. And from here to Sooke (and then back down the... -
707kevin reacted to Rickyd's post in the thread TJ in serious jeopardy of needing transplant with Like.
How far did it get driven with the water pump not spinning? Without water circulating you don't know how hot it got. I would start with...
-
707kevin reacted to TheBoogieman's post in the thread Cooling fan upgrade comparison: Explorer 11-blade fan and HD clutch versus SPAL 19" 850-watt electric brushless fan with Like.
What problem that I don't have will this fix? :unsure:
-
Well duh, that's exactly the kind of job farm jacks were made for.
-
33x10.50x15
-
Mine hasn't been out of my backyard shed for 16 years.
-
I mounted my Hi-Lift in the dumpster.
-
The BFH Garage guy says it's a interference/slip fit meaning that it won't slide on by hand. During setup, don't use the crush sleeve...
-
Check that the bearing numbers are the same from old to new. You shouldn't be able to push the pinion on with your hand. I normally use...
-
The tail bearing is a press fit meaning as you tighten the pinion nut the bearing gets pressed on. As you work through your setup you'll...
-
fellas let me tell you about a bad day. get in my 05 jeep Rubicon to take the trash and run a few errands. I get up the road to a big...
-
-
Loading…
-
Loading…
-
Loading…
