Recent content by abe abel

im with you chris to me it looks like a 3 or 4 yr old with a tube of lip stick

ill ill agree with squatch I had a 62 409 4sp W/possi pass anything but a gas station

w very nice except the seats were hard I really like the E- brake

ive had the same problem over the years until I welded a piece of angle iron to a plate of steel that has to be squared to start with like your axle shaft grind a small flat spot on it then center punch it for a starting point clamp axle to angle iron and if ya can put in drill press

what ever you use to loosen the rust be sure to use a 6 point socket not a 12point use the shortest extension you have and in a 1/2" drive ratchet or braker bar if you have one when ya put one back in use a regular spark plug socket in a 3/8 drive

th the add did just what it wanted to do (got your attention) yes it did

ma makes me think back of the edsel and they didn't sell

the way we cut down vehicles other than a tj what do they say about the tj's

m my first thought is that come along is only 1/4" cable and good for only 4000 lb the block and tackle doubles the pulling power per say pulling that much weight and that short handle is a disaster waiting to happen if a cable broke

that part your looking at is part of the evap system not replaceable comes with the tank mine was cracked and wouldn't pass smog here in good ol California had to have it smoked tested to find the problem the shop couldn't fix if with out changing the tank so I brought it back home pulled the...

pretty much right on mr bills im down here off of 36 n west of red bluff I was releaved that they stopped the fire at cottonwood creek I was about a half mile from the baker rd fire I live off of baker rd over looking hwy 36 that was to close for comfort when logging was going good they...

now that's white

back in 65 I think it was that we had to do away with the old road draft tube and install the pvc valve, retard the timing for smog it was written up to make us beleave that after 20/25 yrs one year would drop off to be smog exempt well here it is 2018 and the last time any gas vehicle was...

I l if I have a choice between torx and allen head ill take the torx so some improvements are good I just have problems with electronics like abs brakes half hydraulic and half electric it takes special equipment to bleed the brakes it seems that the more electronics we have the less you can...

nice to drive once or twice couldn't afford $$$ or the insurance