Recent content by BigWheel88

So I am installing a cheapish Double Din Radio with Android Auto by brand Atoto. I have it all hooked up according to wiring diagrams afaik. The one thing that seems to be causing issues is the illumination wire. They are both orange on the metra harness and the radios harness. It seemed to work...

I have what is basically a ram mount with the Quadlock ball adapter mount. Need to buy a special case for phone which i know many won't want to do, but I also have a Quadlock bicycle mount so it works well for me

I got one of these. it was about $150. Use ratchet straps. Looks like they don't have any right now but there is probably something similar by another brand. https://www.amazon.com/gp/product/B0009I8AO6/?tag=wranglerorg-20

looking at the pick the guy on bottom left seems to be only mostly stock'ish one, the other three have had obvious mods to at least bumpers, flares, lifts and probably are trying to recoup those upgrades

there is info here for each common height of lift if you scroll down a bit on first post. https://wranglertjforum.com/threads/a-beginners-guide-to-lifting-your-jeep-wrangler-tj.733/

I can't help but think of Team America World Police.

As far as I know if you have a Rubicon it is a 241 and everything else is a 231. Also think there is a circular plate on the case that says what it is. I'm not at home to take a pic right now

Just remembered I have one on mine that I have never used. Went out to take a pic. this is drivers side back of engine

Not the best pic but it's in the service manual. https://wranglertjforum.com/threads/jeep-wrangler-tj-factory-service-manuals-fsm-technical-documentation.4618/ just that page below

i have another bestop frameless soft top so not sure if the exact same as OEM one they make but I'm guessing probably. I would call Bestop as well but you should be able to just use something like this and cut it down to size. https://www.amazon.com/dp/B00NDR28JI/?tag=wranglerorg-20

This. The OEM one was black. Trying to find part number at Oreilly where I got replacement but not finding it.

Not a problem. So I bought this Rampage light and was planning to cut off the bottom of L so it was straight and strap it center tube so light was over tire then realized that was precious visibility over the tire. Just luck that the back of this light has two bolts inside coming out that...

I bought my jeep with the orfab modified by PO. They welded on a L bar and a metal grate to the bottom which holds up jerry cans or other stuff I have put there just fine. The bend is to clear the tailgate hinge

I changed my RMS bout 6 months ago. and I was underneath yesterday mentally thinking about what I need to do for another project and noticed one of the oil pan bolts fell out. I guess I did not torque it down properly. There are a I think a couple different types/sizes and not sure which fell...

with that white top it's like they tried to make it like an old Land Cruiser. Those seats look nice