Recent content by Bkspear

I was testing my transfer case with the front wheels on the Jeep on jack stands. I noticed when I engaged 4HI and 4LO the front wheels spin opposite of each other. Is this normal? I have a 2006 with stock diff's and stock np231J tcase. Thanks.

I replaced the stock dash gauges with a Holley Pro digital dash in my 2006 TJ. I noticed after this that the dome lights in the soundbar will not come on when you open the door, or when you turn the switch on the handle on the steering column. I checked fuses and relays several times, then I...

How did you mount the transmission? Did you just use the Jeep skid plate or an aftermarket crossmember? Thanks.

What about the oil pan? Where you able to use the oil pan that came stock with the 5.3l or an aftermarket one for better clearnace?

Awesome! Thank you for the info.

Anyone that has done an LS swap in their TJ, what intake manifold did you use? I am swapping in a 5.3L (LM7) and I am wondering if the stock truck manifold will be too tall to work in the Jeep. Thanks.

Has anyone purchased a transmission from a company called "QualityUsedTransmission" before? How was your experience with them? Thanks.

This is my first engine rebuild so I am just trying to be cautious. I didn't want any bent or damaged rods. Thank you for the info, I appreciate it.

Yes, but I have to use some force.

I am saying I think the new ones are too tight. The piston does not have any play on the rod.

Pic of piston and pin.

I am replacing my pistons and pressed the wrist pins into the rods. I am reusing the rods but have new pistons and pins. The rods on the pins seem very tight compared to the old original ones. Any suggestions?

Thank you for the info. Do you happen to know if there are any other specialty tools I will need during my rebuild of this 2.4L? Thanks again.

Any chance you know the part number for the installation tool? I’d like to get both at the same time. Thanks!

Anyone with a 2.4L engine removed the crank sprocket to replace the oil pump? I used a puller tool and it broke the edges off the sprocket. Any help please???