Recent content by bmcgc

The transmission pan on my 99 TJ was leaking like a waterfall so today was the day. I have had the Summit deep pan sitting in the garage for a few months, waiting for cooler weather. All was going smoothly until the last bolt for the filter extension snapped off. It snapped at 25in lbs, I...

The TJ belongs to the misses. My DD was a 2022 Hyundai Santa Cruz. Great trucklet, 2.5T AWD, no issues other than it was black and I like a full size truck. I bought a new off the lot 2023 F150 XLT Powerboost. Plenty of room, gobs of power, 23-24 mpg, MSRP was 65k, I got it for 57k OTD. I...

Wife or GF is not the issue. The issue is that she is the only one that knows if he is getting laid tonight.

My Summit pan arrived today. The picture clearly shows a pan gasket, but mine did not come with one. What is the consensus, cork or rubber?

Thanks

Has anyone installed the Summit pan under the stock height skid plate to verify that it fits? I ordered my pan today, planning on installing next weekend.

No fresh oil under the TJ this morning. Might have caught a break.

Had to throw in the towel for today due to severe weather. We were working in the driveway. Everything is back together except refilling the transfer case and installing the skid plate. Every one of the pan bolts was loose by 1.5+ turns. I torqued them to 150 in lbs and will see if I have...

The seals look great. Put a socket on the pan bolts and everyone of them is loose. Do I tighten to Spec or drp the pan and change the gasket?

Skid plate came off ok. ATF everywhere. Pressue washed everything, tranny mount and front driveshaft new, Only about 1 qt came out of the transfer case. Taking a lunch break, then back on it.

I can't come up with the p/n's so I am not going to address the TC shaft seals unless I need too. I spent the last 1/2 hour looking for the box with various sized PVC endcaps that I use to set seals. While looking for said box, I picked up and moved the box that says "oil seal seat kit" about...

Finally crawling under the TJ to tackle this today. I want to have the TC seals on hand if needed. I do not trust auto parts catalogs (long story). Can anyone provide the correct part numbers for the input and output shaft seals? 99 TJ, 32RH, bone stock.

The first couple months I owned my 99 Tj 4.0/AT, all was well. The last few months I have had a giant transmission leak. So big, that I have had to add fluid. We have only driven it a couple times since late April, so the leak has been on the back burner. This weekend I am going to attempt...

I get a break on car tags for being a veteran. It's about $125 to register all 5 vehicles, and just the motorhome is $70 of that due to the GVWR.

The only way I am getting near that thing is if Queequeg harpoons me, then throws a trawl net on me and drags me behind it.