BonesXX
TJ Enthusiast 62 From Atlanta, GA
Latest activity Postings Images About
-
-
BonesXX replied to the thread Side mirrors: old style versus new.The old style mirrors have screws on the bottom to tighten the mirror. Thanks to Jerry mine no longer move when I close the door. -
BonesXX replied to the thread How does the walker catalytic converter connect? front walker 53529 to rear Walker 16312..This is the part number image for the gasket. This is confusing. Do the later models use these at the manifold? Mine is a ‘98.
-
-
BonesXX replied to the thread How does the walker catalytic converter connect? front walker 53529 to rear Walker 16312..Just saw Mac’s post. If the donut gaskets to the manifold are not included you will need 2. They are only a few dollars.
-
BonesXX replied to the thread How does the walker catalytic converter connect? front walker 53529 to rear Walker 16312..Pretty sure what they are calling a gasket is a band clamp. If you zoom you can see the cat side is flared. May be you could check with...
-
BonesXX replied to the thread Has anyone used the Dynomax UltraFlo SS Muffler?.The first thing to do is make sure your entire system is secure and not shaking/moving when the vehicle is moving. Also if you are...
-
BonesXX replied to the thread Crank Position Sensor 98 4.0 Auto.One month update. All is good. No issues throughout the rpm range or at idle. BTW I caught a sale and paid about $50 at Advance. Had to...
-
BonesXX replied to the thread Has anyone used the Dynomax UltraFlo SS Muffler?.I should have added I have a Magnaflow hi-flow cat. My cat came apart inside and it was cheaper to get the MF manifold back system than...
-
BonesXX replied to the thread Has anyone used the Dynomax UltraFlo SS Muffler?.I have had this one for 3 1/2 years. No issues. Nice tone, no drone and sounds great at idle. Slightly louder than stock...
-
BonesXX replied to the thread Cracked Radiator Question.Put a Denso on a few months ago. No issues at all. Thread in and out the bolts in the frame on the new radiator before installing. Also...
-
Got my rims back to aluminum. Oven cleaner, pressure washer, lots of patience. Might be my favorite thing I’ve done to this thing
-
BonesXX replied to the thread Andy G needs brake love.Watching
-
BonesXX replied to the thread Crank Position Sensor 98 4.0 Auto.Was it throwing a misfire code? Just curious what it was. Not sure about a learning process but I did let it idle for maybe ten minutes...
-
BonesXX replied to the thread Crank Position Sensor 98 4.0 Auto.I bought the NTK and installed. Took about twenty minutes with a 90t gear 1/4 ratchet and about 8 inches of extension. A normal ratchet...
-
BonesXX replied to the thread Crank Position Sensor 98 4.0 Auto.It’s been basically shutting down or a brief hard stall. I also have the DTC. Yesterday it shut down and wouldn’t start. I unplugged the...
-
BonesXX replied to the thread Crank Position Sensor 98 4.0 Auto.Thanks for the quick replies! Advance has the NTK available so I am going to try that one.
-
-
Loading…
-
Loading…
-
Loading…
