Recent content by Boomer1958

  1. Boomer1958

    High Idle

    Running like a champ!! Serviced the battery cables, running at about 900 to 1000rpm. Thanks for the help TJ Forum.
  2. Boomer1958

    High Idle

  3. Boomer1958

    High Idle

    Just getting back to the LJ. Busy and HOT week in SE North Carolina. Going to reconnect the battery and see what happens. Fingers crossed
  4. Boomer1958

    High Idle

    Thanks. That is what I did approx 30 minutes ago. How long should it be disconnected?
  5. Boomer1958

    High Idle

    I have a 2004 lj I6 auto. It has been running great, no issues. I accidently left the ignition key on while working on aux. lights and drained the battery. Started it up today and have an idle of apporx. 2,500rpm and then drops back to approx 1250rpm. I have "looked" for a loose/cracked vacuum...
  6. Boomer1958

    Front signal / marker lights

    Finally got around to working on my turn signals again. BTW, it is front signals only, rear has no issues. Here is what is going on: With no lights on, turn signals work great, including side markers. With headlights on, running lights work great, including side markers. With all lights off...
  7. Boomer1958

    Front signal / marker lights

    Thanks for the help. I am going to have to find someone to give me a hand with this one. Above my pay grade. I will post when I get some resolution.
  8. Boomer1958

    Front signal / marker lights

    I have replaced my stock front turn signal and marker lights with LED. I hope I explain this so everyone can understand. If I do not turn on my headlights, turn signals work great and side markers blink sporadically. When I turn on my headlights, the front turn signal does not work and the...
  9. Boomer1958

    SOLD 2004 Jeep LJ 2-piece rally hardtop

    Rally brand Jeep LJ hardtop with sliding side windows. Removed to install Bestop soft top. Works great.
  10. Boomer1958

    Finally getting started

    The reason for the rough idle and "skip" was a bad plug. As mentioned, plugs were new. At least is was an easy fix.
  11. Boomer1958

    Finally getting started

    That's a great look. I want to keep the wheels inside the fender wells as much as possible and not have clearance issues.
  12. Boomer1958

    Finally getting started

    Thanks.
  13. Boomer1958

    Finally getting started

    Autolite 985 gapped .035
  14. Boomer1958

    Finally getting started

    I might need to go back and check. I thought i had about 1/2 inch at the closest point. Got spark plugs from NAPA. I asked for factory spec plugs.
  15. Boomer1958

    Finally getting started

    New at this so I hope I am posting correctly. I have finally started working on/modifying my 2004 LJ. It is/was bone stock. My plan is to be able to daily driver, tow behind motor home and moderate trails. I am going to run 33x12.50 with a 3 inch lift and 1.25 inch Savvy body lift. I have...