Brian Alcorn's latest activity
-
Brian Alcorn replied to the thread Blinking front axle locker light.I figured it out.. I caught the rear sensor wires to early and one was actually the wire that allows front after rear .. put those back... -
-
OK so I moved my locker pumps under the hood and wired them to switches to lock at the push of a button .. used the sensor in the diff...
-
Brian Alcorn replied to the thread Locker requirement.Hijacked ....
-
More correctly, the plunger extends to complete a circuit when the shift collar moves over that is holding the plunger in the open...
-
Brian Alcorn replied to the thread Locker requirement.Right but it just closes the circuit when the locker locks .. make's a connection
-
Brian Alcorn replied to the thread Locker requirement.Correct me if I'm wrong... this is the sensor in the diff that makes the light stop blinking and remain solid by mechanically locking...
-
-
Brian Alcorn replied to the thread Locker requirement.I'm not beyond that .. I have moved the pumps and having to extend the wires I figured I could wire em separately.. to use front alone...
-
Brian Alcorn replied to the thread Locker requirement.Thanks for the replies .. Ok.. well it's as easy as wiring the pumps to a switch .. guessing I don't need the light .. but the switch...
-
Controlled by the cluster, not the relays. Lots of threads on bypassing the safety features. Here's one...
-
If you do the Jerry Bransford (forgive me if I’m naming it wrong) method you are dealing directly with each locker- speed, transfer...
-
I hate that manufacturers do this.
-
I can feel when my lockers are engaged by the slightest turn,and know which one.though i usually remember which switch i hit. Totally...
-
Brian Alcorn replied to the thread Locker requirement.I have moved the pumps to under the hood and extended the rear line and the pumps are being controlled by a switch but .. I'm wanting...
-
Where does the locker requirements come into play..ie 4lo under 10mph.. for instance if I power the relay under the hood will it light...
-
Recently replaced dash wiring harness .. everything works except the locker switch.. wanting to move them to the alternate battery tray...
