Recent content by BrianV

So I was having a couple tires put on the front this morning and while the wheels were off I noticed on the passenger side axle, the dust cap was free spinning and the axle has about a 1/4” of what looks like a move to the outside, which caused the dust cap to be loose. The drivers side was...

Possible with a 1/4” but I used the 12mm ratchet. That’s what really gives you clearance from the cats and likely more ability to apply torque. That’s what I photo’d it with. The socket in a 12mm ratchet.

I have removed and reinstalled my precats a couple times. It’s not the easiest job to reach those bolts. But I did find a tool combo that has worked the easiest. It’s a shallow socket set from Amazon that can also leverage a 12mm ratcheting wrench as a driver; TecoTek 13-Piece 1/4-Inch Drive...

I have removed and reinstalled my precats a couple times. It’s not the easiest job to reach those bolts. But I did find a tool combo that has worked the easiest. It’s a shallow socket set from Amazon that can also leverage a 12mm ratcheting wrench as a driver; TecoTek 13-Piece 1/4-Inch Drive...