Recent content by Clocktower07

*UPDATE* The previous potential buyer was unable to make the logistics work, so the jeep is back on the market!

Thanks Greg - listing updated! She's still rocking the stock LSD Dana 44 rear and open Dana 30 front.

2005 TJ Unlimited / 4.0L / 6-Spd Manual / 136,000 Miles $17,000 OBO *The previous potential buyer was unable to make the logistics work, so the jeep is back on the market!* This jeep will get you anywhere you want to go (and back again) without any drama – in fact, it just completed a...

Had to do the same thing and it's been fine for a year and about 5,000 miles.

I'm currently using a speedohealer and it seems to work fine. I ran one of the previous versions for several years on one of my earlier LJs. https://www.polyperformance.com/healtech-speedohealer-jeep-plug-n-play-kit-for-98-06-wrangler-04-06-tj-98-01-cherokee-xj-shv4a-j01

Also, if you're looking for mountains, here's something to save you the trouble. It's Florida's highest point @ 345 feet!

I was stationed in/around Pensacola for several years. The beaches are nice, allegedly the fishing is excellent, and there are diving opportunities if you’re willing to go a bit offshore. Unfortunately, the area was starting to get a bit crowded when I left (2021) and infrastructure...

I wanted to post a quick follow-up since I know others are having similar issues. As @Steve04 suggested, I removed the plunger that blocks the unused port of the oil sender plug and omitted the weather seal from the rear of the plug. PROBLEM SOLVED. I've daily-driven the jeep for the past...

For sale, one pair of PRP Enduro Elite reclining seats. I bought these seats a few months ago for my LJ, but my wife doesn’t like them. They are in very good shape and have hardly been used. The seats are pretty universal, and I've seen people use them on CJs, YJs, TJs, JKs, XJs, and even...

I just installed a PSC SG400R box into my '05 LJ last week - it really tightened up the steering! I bought the PSC hose kit too, but it is just a Duralast 80293 hose, an extra 90 degree fitting for your low pressure line, and a hose clamp...the bends needed to be adjusted a bit and I had to...

This is very interesting. There seemed to be a lot of disagreement on the Intrepid Forum about whether the "vent" was actually a modified resister. Either way, it couldn't hurt to try...

The 05-06 FSM references a three-wire sending unit supplied with 5V, but (by all appearances) I have a one-wire sending unit supplied with 12V...

This makes 100% sense and should work in the real world, but I'm getting a 0 psi indication with the connector disconnected OR grounded. The connector has 12 volts on it - perhaps "something" happens in the sender and the PCM is looking for another value?

Correct. It looks like a single brown wire with white trace.

Could this be an issue with the cluster itself? I'm thinking of swapping out my original unit with a spare to see if the malfunction remains.