CV04TJR
TJ Enthusiast 37 From Ponder TX
Latest activity Postings Images About
-
-
You got me up off this chair. Went out and measured the height to my stock TC skid. Just a hair shy of 17" on 35" tyres and 4" lift. -
Fixed my stock front bumper:
-
Nearly 3in? Nice. BTW, I hate you.
-
Nice!
-
CV04TJR reacted to Vtx531's post in the thread Getting started on my floor pans and torque boxes with
Like.
Well, I always post the good with the bad. I ran into a little issue... First off, did some plug welds and they came out pretty good. A... -
CV04TJR reacted to Vtx531's post in the thread Getting started on my floor pans and torque boxes with Like.
Thanks Matt! I got started on the FUN part today - putting in all the screws. It is almost like doing a paint job in that there are...
-
If anyone is wondering how well the Barnett diff covers hold up, here you go...
-
CV04TJR reacted to RustyAutoholicGuy's post in the thread BEW TDI Diesel Swap RHD TJ Wrangler Build (Picture Heavy) with Like.
Hey TJers, With parts finally coming in, I added an expansion tank and re-routed some of my coolant hoses on my TDI powered TJ Wrangler...
-
Bolted on a extra faded set to verify the fit. All is good!
-
Used an old set of rear flares to make a template, then drilled the holes. Everything lined up perfectly and I didn't have to remove the...
-
First, re-filled the cooling system so I could test the new radiator. Seems fine. Then I installed the "Searchers" solenoid mount...
-
CV04TJR replied to the thread What did you do to your TJ today?.Savvy skid installed, goodbye shovel! Have to get the exhaust fixed and order a driveshaft.
-
-
Happy Fourth of July from my family to yours 🇺🇸
-
Got that bolt out so now I can put the interior In . Didn't have to weld a nut on it , I had a set of extractors and it gripped the nub...
-
I wouldn't run Seafoam in your engine oil. It will really thin it out a lot and take away the lubricating properties of the oil...
-
-
Loading…
-
Loading…
-
Loading…
