Recent content by Dyl

  1. Dyl

    Remove parking bulb from H4 conversion kit

    Noob question. Do you just pull the rubber socket to remove the T10 bulb? Or replace the bulb using the other hole (high/low beam)?
  2. Dyl

    Front sway bar bolt hitting frame

    I just found that the drivers side (RHD jeep) sway bar end link bolt is scratching the frame. Passenger side looks fine. I have attached pics of both sides. It should be from the lift I installed sometime back. It's only a 2inch spacer lift and I haven't changed any other stock hardware when I...
  3. Dyl

    Need to depress clutch to start in 4 LO

    Ok so that confirms it. Mine won't start unless the clutch is pressed in any configuration either. The reason I mentioned 4Lo specifically is, you stalled in a steep hill in 4lo and the jeep would roll back if you had to press the clutch to start. For 2H and 4H I don't really care.
  4. Dyl

    Need to depress clutch to start in 4 LO

    I have a 1997 4L 5sp (Australian model) and it needs to press the clutch to start even in 4lo. From what I have read online, it says you should be able to start in gear when you are in 4lo. Wondering if that's only for US models?
  5. Dyl

    This stock front bumper hook as a recovery point?

    Did you use a soft shackle?
  6. Dyl

    This stock front bumper hook as a recovery point?

    No it's the stock hook found in the Australian models. Here's pic of another https://carsales.pxcrush.net/carsales/cars/private/dstve1bs0x4rdscy86lk5tx10.jpg?pxc_width=480&pxc_height=320&pxc_method=crop
  7. Dyl

    This stock front bumper hook as a recovery point?

    Hi all, a quick question. Can this hook on my TJ's front bumper be used as a recovery point? If so all I need is a rated shackle?
  8. Dyl

    Do my pinion angles look alright?

    Ok just did a Google search and it seems I need adjustable rear control arms to do that ? Wondering if I drop the transfer case say by 1inch if it would correct those angles?
  9. Dyl

    Do my pinion angles look alright?

    Is it possible for you to guide me on how to set it up like the bottom pic? I guess I would have to rotate the rear axle downward but is it possible to do that ?
  10. Dyl

    Do my pinion angles look alright?

    I gave no back story as not to influence any answers 😃. Anyways. I did a 2inch lift and 31inch tyres but didn't feel any vibes. But recently I have been getting a slight vibration when taking off in 1st gear. It only happens for maybe 1 second and goes away as I give more gas and it gain more...
  11. Dyl

    Do my pinion angles look alright?

    Is it possible to evaluate that from the picture? Please share what you think.
  12. Dyl

    First gear vibrations

    Is it still the case for 1997 TJ as well? That is I could drop it 5/8" by using washers? Reason being I have noticed this same vibration when I'm taking off that goes away soon after. I have 2inch lift with 31inch tyres and everything else stock.
  13. Dyl

    Anyone know what this cable is?

    I see, thanks for the information. So what does the reservoir contain? Also what's blend door
  14. Dyl

    What did you do to your TJ today?

    Did a transfer case fuild change (N231 J). Had to use impact wrench to remove Allen fill and drain plugs, they were really tight!
  15. Dyl

    Anyone know what this cable is?

    It seems to go inside cabin as in first pic and connects to a box or something (2nd pic). What is it.