Eddie Greenlee
TJ Addict 59 From Mississippi
Latest activity Postings Attachments Images About
-
-
<iframe width="560" height="315" src="" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write... -
After you've done what @Gollywomper said above, and if you've isolated the vibes to the rear (40-50mph is low speed for a driveline...
-
That is indeed unusual speed for vibes from what i have read so far and experienced myself, typically 55 - 60 is when party starts. As...
-
Eddie Greenlee replied to the thread Is this the correct transmission dipstick for a 32RH transmission?.Sorry just saw this. I’ll do some measuring. I found a local Jeep salvage guy that had one. I may have another one Also. I think I got...
-
Eddie Greenlee reacted to Jerry Bransford's post in the thread Is this the correct transmission dipstick for a 32RH transmission? with
Like.
What is the length of the dipstick itself and the length from the top to the full line? And where did you buy it? A link would be great. -
Eddie Greenlee reacted to Chris's post in the thread Arizona Rockhard 4x4 harness bar (local pickup only) with Like.
I just got rid of the harnesses all together as I wasn’t really using them.
-
Eddie Greenlee reacted to Chris's post in the thread Arizona Rockhard 4x4 harness bar (local pickup only) with Like.
I do, but shipping would cost more than a brand new one unfortunately.
-
Eddie Greenlee replied to the thread Arizona Rockhard 4x4 harness bar (local pickup only).Did you do something else for harness bar ?
-
Eddie Greenlee replied to the thread Arizona Rockhard 4x4 harness bar (local pickup only).Chris ? Do you still have this ?
-
Eddie Greenlee reacted to hear's post in the thread Is this the correct transmission dipstick for a 32RH transmission? with Like.
Here’s the o-ring I found for my 32RH in case you’re still looking for one...
-
That speed range is a bit odd for a DS vibration. Have you had your tires checked and rebalanced? You need to identify which drive line...
-
Should look like this... rear pinion angle should point about 1/2 to 1 degree lower than the driveshaft's angle. You can remove the...
-
If you have a SYE kit installed your rear pinion angle needs to be essentially the same the driveshaft angle. Ideally the rear pinion...
-
Eddie Greenlee replied to the thread My pinion angle.Yes mild though around 45 to 50 mph
-
Eddie Greenlee replied to the thread My pinion angle.I do have a super short SYE and both are double cardan drive shafts
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…