Frdbronco8
Reaction score
26

Joined
Last seen

Latest activity Postings Images About

    • Frdbronco8
      Frdbronco8 replied to the thread Brake pull.
      I never really had to slam on the brakes before changing them out so it's hard to give a fair comparison but they work well and at least...
    • Frdbronco8
      Frdbronco8 replied to the thread Brake pull.
      Thanks again for all the ideas. I got that welded up. Ended up replacing pads, rotors, calipers and brake lines. Turns out the pulling...
    • Frdbronco8
      Frdbronco8 replied to the thread Brake pull.
      I'm guessing the grooves are causing my problem but this sounds like a good checklist to do as well. If fixing the grooves cures the...
    • Frdbronco8
      Frdbronco8 replied to the thread Brake pull.
      AN Any issues welding on the cast knuckle?
    • Frdbronco8
      Frdbronco8 reacted to LONGJP2's post in the thread Brake pull with Like Like.
      You'll need to add weld, then grind it back down flat.
    • Frdbronco8
      Frdbronco8 replied to the thread Brake pull.
      Everything looked dry. I ordered up Bmb pads, centric rotors and new calipers. I pulled the left caliper and I this groove worn in the...
      • 20240213_203043.jpg
      • 20240213_202558.jpg
    • Frdbronco8
      Frdbronco8 replied to the thread Brake pull.
      Thanks for the replies. Everything else feels pretty tight and it's done it since it was stock so thinking it's brake related. The pass...
      • 20240212_181104.jpg
    • Frdbronco8
      Frdbronco8 reacted to mrblaine's post in the thread Brake pull with Like Like.
      Check the dust shield on the right side right behind the tie rod end on the steering knuckle and see if there is any grease on it. It is...
    • Frdbronco8
      Seeing if I can narrow this down before throwing parts at it. Pulls a little to the left on moderate to hard braking. If I let go the...
    • Frdbronco8
      I knows it's been years but if anyone else was interested it worked well. There is a little vibrations when as I feather the clutch to...
    • Frdbronco8
      Frdbronco8 reacted to Don Bulee's post in the thread Front "Great-Value" Antirock? with Like Like.
      damn... its already sold... I rather have a used Antirock that having a chinesium torsion bar in my rig.... but do it! I think its...
    • Frdbronco8
      Frdbronco8 reacted to Don Bulee's post in the thread Front "Great-Value" Antirock? with Like Like.
      I wouldn't spend 200 bucks for a knoc off antirock... but I would definitely want to see someone get one and discuss with him what were...
    • Frdbronco8
      Frdbronco8 reacted to GregBelleville's post in the thread Front "Great-Value" Antirock? with Like Like.
      Keep your eye on the for sale section here, I bought my anti rock off here for like $250, they come up fairly often for the guys...
    • Frdbronco8
      Frdbronco8 replied to the thread Front "Great-Value" Antirock?.
      Dang I totally would have! Trust me I'd much rather have an antirock. I try to keep an eye out for used ones locally.
    • Frdbronco8
      Frdbronco8 replied to the thread Front "Great-Value" Antirock?.
      All I did was offer to try one and people get pissed. If it's crap I will be sure to objectively tell the world instead of just...
      • Screenshot_20231218_201743_Chrome.jpg
  • Loading…
  • Loading…
  • Loading…