Frdbronco8's latest activity
-
Frdbronco8 replied to the thread Brake pull.I never really had to slam on the brakes before changing them out so it's hard to give a fair comparison but they work well and at least... -
Frdbronco8 replied to the thread Brake pull.Thanks again for all the ideas. I got that welded up. Ended up replacing pads, rotors, calipers and brake lines. Turns out the pulling...
-
Frdbronco8 replied to the thread Brake pull.I'm guessing the grooves are causing my problem but this sounds like a good checklist to do as well. If fixing the grooves cures the...
-
Frdbronco8 replied to the thread Brake pull.AN Any issues welding on the cast knuckle?
-
You'll need to add weld, then grind it back down flat.
-
Frdbronco8 replied to the thread Brake pull.Everything looked dry. I ordered up Bmb pads, centric rotors and new calipers. I pulled the left caliper and I this groove worn in the...
-
-
Frdbronco8 replied to the thread Brake pull.Thanks for the replies. Everything else feels pretty tight and it's done it since it was stock so thinking it's brake related. The pass...
-
-
Check the dust shield on the right side right behind the tie rod end on the steering knuckle and see if there is any grease on it. It is...
-
Seeing if I can narrow this down before throwing parts at it. Pulls a little to the left on moderate to hard braking. If I let go the...
