freedom_in_4low's latest activity
-
I've used muriatic for decades on period correct hardware on old cars. Metal prep and etch works too. I recommend a 5 gallon bucket... -
I went with muriatic pool acid because it’s what I Had. I mixed 2 cups with 4 gal of water. It takes a few hrs to remove the scale. It...
-
freedom_in_4low replied to the thread Pickling some steel.Yes, I used vinegar. It took at least a day, 2 was better, and I found temperature played a role as well...it went faster when warmer.
-
I may be posting too late for you - I just saw this thread. I use muriatic acid all the time to both strip zinc plating off steel...
-
freedom_in_4low reacted to basedbb69's post in the thread What's the best thing you've bought for your Jeep under $100? with
Like.
Folding tailgate table. It's just big enough to fit a coleman 2 burner propane grill. I also got some pouches that I keep attached to it... -
freedom_in_4low reacted to 4Lo4Sho's post in the thread Best price on a Bestop Supertop NX - UPDATE: Bought and Installed! with Like.
Very possible. If other Jeep’ers are like me, their tastes and needs change fairly regularly. It’s also possible that someone may just...
-
freedom_in_4low replied to the thread Best price on a Bestop Supertop NX - UPDATE: Bought and Installed!.Over 3 years I've come to the conclusion i might be better served with a framed top. I might post up locally and see if someone feels...
-
freedom_in_4low reacted to 4Lo4Sho's post in the thread Best price on a Bestop Supertop NX - UPDATE: Bought and Installed! with Like.
Installed! Very impressed by the overall quality of this kit. Took us about 3 hours. Instructions leave a lot to be desired. Install...
-
freedom_in_4low replied to the thread Another Heater Core Thread.The tanks do seem to be the most common failure mode. That ends up convincing many that they need an all aluminum radiator, which if my...
-
If my experience today is any indication, the plastic tank will go before the aluminum core. I guess I can’t complain about a 21 year...
-
freedom_in_4low replied to the thread Another Heater Core Thread.Generally true, but aluminum already is and will remain the least noble metal in the system. Copper is farther down the galvanic series...
-
Interesting perspective. I think my concern with the aluminum options on the market is the lack of appropriate turbulator construction...
-
So after 15 minutes of fiddling with the pins and plug I got them to seat properly and locked in and boom the locker works.
-
Check that, saw on another thread and forum, someone talked to Eaton. I'll take their word, and they said between 3.5 and 6.2 ohms is...
-
freedom_in_4low replied to the thread Eaton E-locker Question.It makes sense if you think about it and watch that video. If the carrier needs to rotate relative to the housing then you need to turn...