GregBelleville
TJ Enthusiast From Southern California
Latest activity Postings Attachments Images About
-
-
GregBelleville reacted to CharlesHS's post in the thread Tea kettle whistle during cold months (suspect a manifold leak) how easy is it to find and tighten the bolts? with
Like.
The torque spec on the intake and exhaust manifold bolts 23- 24 ft lbs. Most are easy to get to except a couple below and here is a... -
GregBelleville replied to the thread Tea kettle whistle during cold months (suspect a manifold leak) how easy is it to find and tighten the bolts?.Dude if you have a mechanic only charging 70 an hour can I get those digits? 😁 Seriously that's half what most mechanics charge these days.
-
common core math
-
GregBelleville replied to the thread 97 TJ axle questions.30 splines instead of 27. Also make sure you get 1541h hardened steel shafts.
-
GregBelleville replied to the thread Failed smog test for high nox.It's already got an aftermarket cat in it of unknown age, which your right, likely will need to be replaced. What I'm trying to do...
-
GregBelleville replied to the thread Failed smog test for high nox.192k
-
how many miles are on your jeep?
-
GregBelleville replied to the thread Failed smog test for high nox.I'm planning to pull the plugs tomorrow. They were replaced last year, but we'll see what they look like.
-
GregBelleville replied to the thread Failed smog test for high nox.Last night I sequentially capped off 1 vacuum line at a time where the 3 nipples are on the side of the intake manifold while the engine...
-
GregBelleville replied to the thread Rear main seal or valve cover leak? Your opinions on cost of repair..You've got the right budget, you just need to find a TJ or LJ Rubicon instead if you're willing to spend that kind of $. 👍
-
GregBelleville replied to the thread Nikki's yellow throwback Jeep.I got the opportunity to wheel with @Nickgsjeep last year when we ran Gold Mountain together. I can attest, his Jeep is absolutely...
-
GregBelleville reacted to macleanflood's post in the thread Failed smog test for high nox with Like.
Can't spray carb cleaner at all the vacuum actuators and lines...so cap it off and see if it fixes the idle. -Mac
-
GregBelleville replied to the thread Failed smog test for high nox.Haha, I'll have to look into that guarantee. Regarding the vacuum reservoir, I did get under there and spray carb cleaner where the...
-
GregBelleville replied to the thread Failed smog test for high nox.Well here's an update on my situation and additional steps taken which resulted in another failed test this morning. 😭 Swapped in the...
-
-
GregBelleville reacted to jjvw's post in the thread Viair 88p on ABS tray - have a couple questions with Like.
I can't come up with another appropriate quote to screw up.
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
