Recent content by H_Nunez

  1. H_Nunez

    Vibration at about 58 miles an hour

    I had the sane issue and fixed by correcting the alignment. less than 45 min job
  2. H_Nunez

    What did you do to your TJ today?

    Happy to report that my TJs vibration is finally fixed. Turned out to be a bad alignment. After 2 trips to a "specialized" shop, I decided to do it myself following @Jerry Bransford post. Turned out that toe in was messed up. It took me less than an hr to fix it and get rid of the vibration...
  3. H_Nunez

    H&R 1” lift

    My vibration is more of a humming that I feel in the floorboard, I suspect of the rear wheel balance, I`ll swap em with the front ones and see what happens. Pressure is equal on all at 28
  4. H_Nunez

    H&R 1” lift

    Hi, I`ve got the same vibration kicking in at about 50mph, I have the same setup as you (Ranchos + H&R). I`ve playing around dropping the transfer case pan with not much success, I also measured my drivetrain angles and they seem to be ok... Let`s see what the rest of the forum suggests,,,
  5. H_Nunez

    Winch on a tubular bumper

    Here`s a view from the top that might give a better idea of the space. I would be taking out the Jeep logo plastic cover.
  6. H_Nunez

    Winch on a tubular bumper

    Thanks, that`s a raised winchplate right?
  7. H_Nunez

    Winch on a tubular bumper

    Thanks Jerry, this is my current setup. (The recovery hooks have a spacer in the rear bolt that equates to the width of the bumper`s bracket)...
  8. H_Nunez

    Winch on a tubular bumper

    Good morning forum, I`m finally getting a winch, I currently have a tubular bumper which I really like (old school...). Can someone in the forum share some pics of this setup?, Which kind of winch plate did you use?Not sure if the winch plate should go between the frame and the bumper bracket or...
  9. H_Nunez

    Lifter Tick or Exhaust Leak?

    I had the exact same thing on my 06 4.0. I lived with it for a couple of years until one time when I touched the OPDA when it was ticking and noticed something hitting inside the housing in sync with the tick. I changed the OPDA and the tick was gone for good. Now I only hear a much slighter...
  10. H_Nunez

    Leveled and 32s with H&R springs and Bilstein 5100s

    Hi, I`m going for the same setup, did you added any bumpstop? I also have a 1"BL (in prep for a future tummy tuck), so I`m clear off the fender...
  11. H_Nunez

    Could oil weight have anything to do with my lifter noise?

    By the way... what i believed to be a lifter tick turned out to be an agonizing OPDA... fixed now...
  12. H_Nunez

    H&R 1” lift

    That is the setup i have, didn`t have to change anything... Rides great!
  13. H_Nunez

    Seat Base Rebuild

    This are the ones I got. Quick install. The seats are now as tight as new
  14. H_Nunez

    How to change your OPDA

    Thanks hermano!
  15. H_Nunez

    What did you do to your TJ today?

    replacing the OPDA... Mi tick was not at startup. It started ticking when temp reached 50-60 deg, and stopped just before fully warm