HammeredSole's latest activity
-
HHammeredSole replied to the thread Stumble at 1800 RPM: O2 sensors?.You should probably just try new plugs before you do anything else. I bought my 04 with a code for cylinder 2 misfire. The previous...
-
HHammeredSole replied to the thread Stumble at 1800 RPM: O2 sensors?.I just did a complete overhaul, reloom, and many sensor replacement on the 4.0. It was a chore tracking down OEM for most parts, and...
-
HHammeredSole reacted to macleanflood's post in the thread Stumble at 1800 RPM: O2 sensors? with
Like.
New parts are all shit. Doesn't take much to test it out with an IR thermometer. -Mac -
HHammeredSole replied to the thread Wiring harnesses.I dont think anyone will be able to solve your problem without looking at pictures or the very least seeing it in person even better if...
-
HHammeredSole replied to the thread Need help with a clunking on acceleration from a stop.Not sure. They appear okay, but they are 20 years old. I am getting repair fatigue on this, as I've done nearly an entire restoration in...
-
HHammeredSole replied to the thread Brassworks heater core.I'm following closely. I picked up a rust fre fairly well preserved 2004 X on Sept 1. At first it was the little things; dirty interior...
-
HHammeredSole replied to the thread Need help with a clunking on acceleration from a stop.Ok, I stuck a GoPro on the skid plate, positioned so it can the whole back of the transfer case, the drive shaft, and the rear...
-
HHammeredSole replied to the thread Need help with a clunking on acceleration from a stop.I'll go try it out. I had worried the same, but everything went back together and appeared damage free when I split the case out of the...
-
HHammeredSole replied to the thread Need help with a clunking on acceleration from a stop.It has a brand new ten factory shaft. With the rear shaft out completely, fwd mode, it did not make the noise. I was absolutely...
-
HHammeredSole posted the thread Need help with a clunking on acceleration from a stop in TJ General Discussion.I'm having a strange rapid thumping on heavy acceleration from a stop. I just finished extensive suspension and engine service, and the...
-
HHammeredSole reacted to MikeE024's post in the thread Preventative Maintenance: Oil Pump and Timing Chain with Like.
Changed my HB too. My engine was at 200k and the chain was super loose once I was in there (and the chain guide was broken). The engine...
-
HHammeredSole replied to the thread Preventative Maintenance: Oil Pump and Timing Chain.I noticed the FelPro instructions call for taking that sharp edges off the seal channel with stones. I used a spyderco stone to take the...
-
HHammeredSole replied to the thread Indiana TJ Dana 44 rear axle.I'll take this if condition is good. Please send a text at cell # in PM
-
HI use one of these from Oreillys.
-
HHammeredSole replied to the thread Installing new engine in Cincinnati. 2006 TJ Sport. Expectations Sky High. Reality?.I feel like I could do an LS swap for $7,000, or at the very least a complete custom rebuild of the engine with cam and aftermarket...