Recent content by Inherited-LJ

Ok cool thanks for the help as always!

Full install instructions here if you want to see all the steps: https://www.jegs.com/InstallationInstructions/0/025/025-49315-01.pdf

Looking at the install instructions for where it attaches to the frame, couldn’t I move these brackets up 1.25” to match the 1.25” body lift. Looks like the top of the brackets would then be “hanging over” the frame by 1.25”… would that be a problem?

Is there no way to makes these work with a body lift? I’m not sure how these install so I don’t know what I’m taking about.

I’d have to look it up but my guess is somewhere around 750lbs total (blade, mount and lift combined)

Thank you! Exactly the info I was looking for. I will go with the 5000x 2-3”. I do plan on also lifting the body by 1.25”, but still understand I am going to have to set the bump stops to a point that will limit the up-travel. I am not super concerned with that as I don’t plan on doing any...

Title says it all… bonus points if you’ve got pictures. I have an LJ if you can’t tell by my name. In the winter, I’ll have a snow plow hanging off the front and a hard top + 35” spare on the back. Summer will be stock bumpers and soft top, but still have the 35” spare on the back. Summer set...

Bump. Anyone have any options on this?

I’m going with OME 934/949 since I have an LJ with a hardtop, and going to be hanging a snow plow off the front in the winter and bumper/winch combo in the summer. Given the 934 fronts are for the v8 ZJ, I assume I am going to get more like 2.5” of lift maybe even slightly more… do you guys...

Doesn’t Rancho make a 5000 series for 2-3” lifts? And from everything I’ve read the Rancho shocks run a little long so with a 3” spring (if I can find that), would work out fine?

Hey @Chris - what’s your opinion on running 35” tires with this “budget kit”? I know I would not have factory up travel numbers at that point, but other than that any concerns? I also assume I’d probably need to look into flat fender flares or something… Second question (third really, but who’s...

For anyone following along… after much troubleshooting it was determined that the TCM was the culprit. I ordered a new one and installed just now. Codes are gone and no more limp mode… at least for now. Seems to have fixed the problem, although as I mentioned in the quoted post, it’s not the...

Auto and yes 3.73. I’ve done more research and looks like I should be regearing to 5.13. Now just need to find a shop in CT to trust with the job.

Lol well one of my favorite things to do is laugh at myself.. so you got me!

Im a bit confused. You have a committee that regears for this TJ community? I’m in CT and looks like your in Alabama, so how would that work?