Recent content by ivarr

thanks

2006 tj original factory soft top. getting some leak just to the left of the rear view mirror. new crown header seal coming from quadratek today. i have never taken the top off or down. will never take the top off or down, hell i don't even roll the windows down. as it is now so old i'm worried...

new bluetooth radio

OK. ordered yesterday morning before work. came about an hour or so ago and it's already in. direct plug in harness, i guess they do one up for the individual radios they sell. radio was $99-if you bought it alone. with the kit ( radio, antenna adapter, harness, and bezel to fill the space in...

want to get a sony dsx-a415bt with the plug and play harness from q******tec. is the plug and play harness as simple as unplug the block from the factory 6 disk changer radio and that the new one just plugs into the jeep on one end and the new radio on the other end ? if so, i'm thinking an...

i need a stainless or brass pin maybe 1/4 dia with a flange / flare / larger dia in the center of it. a 1' dowel will be plenty long enough and the center section would be fine at 1/16 thick. i know i've seen something exactly like this at some point in my life but can't find the damn things on...

recommendations for a complete assembly kit ??? 2.5" lift, 31" tires, daily driver, no off roading need VERY cheap possible ??? https://www.quadratec.com/products/56116_0005.htm

i need the steering wheel to go about 3 or so inches to the right to be lined up again. but the adjuster sleeve is bottomed out on the pitman arm side and there's only about maybe 3/16 of threads visible on the drag link side. so what do i do, outside of replace the entire drag link assembly ?

on the ground with wheel on, or up in the air with wheels off ???

need a recommendation for cheap shocks for my tj. 3" lift, 31's ( goodyear wrangler w/ deep at type tread ) daily driver never go offroad

2006 tj 4.0 at 116,000 miles things are starting to hit all at once, so when i saw a small leak sunday morning i knew i should just get a new one instead of fucking around trying to solder a hole. how long to change it out ?

looking for a few pouches in some kind of seat back thing so i don't always have my passenger seat full of my crap, the jeep is my only car. a pouch sized for files with standard 8.5 x 11 paper at the bottom and a couple random sized pouches above that for whatever else i may be toting around...

so, with a 3" lift my 2006 sport has an adjustable track bar. it's bad so have to replace it. do i need adjustable? bought as 2nd owner from a jeep dealer in 2014 with the lift in it. rough country shocks, so i assume all rough country parts in the kit. recommendations for one sub $150- ? rancho...

so finally measured my springs, 15" front 11" rear, after 9 years of owning my 2006 tj, and now know i have a 3" lift. ( was in it when i bought it from the jeep dealer) Had brand new general grabber at's, just put new goodyear wranglers on last week. 31 10.5 15's. are 31's too small for a 3"...

got 4 new tires mounted today, asked to check ball joints as i am 2 months late for massachusetts inspection and have been waiting to afford getting the tires on. said steering damper was gone, and u-joints are toast. just ordered a rancho 5407, but don't know anything about u-joints. and i am...