Recent content by Jeepster97TJ

Also the SYE is a Currie Enterprises kit that is discontinued and the shaft is most likely a RE shaft.

I end up finding one. I had to get the exact size (43mm X 65.2mm X 12mm) then did some research online and found this one - Precision Oil Seal #470460. The outer diameter is slightly loose in the bore so I applied a thin layer of Grey Permatex around the outside of the seal and slid it in and...

Finished up my transfer case fluid & seal refresh. Cleaned, resealed and refreshed diffs. Transmission next...

Well I have bought four different seals shooting in the dark so I have been doing more research. What I end up doing is measuring the output bore and the shaft outer diameter. 43x65x12 is what I came up with and I had to special order a seal, should have it in a couple days. It seems to be a...

Thank you for the info. I have ordered two different ones so let's hope one of them is right.

I have a 1997 TJ with a Currie Enterprises Transfer Case Conversion Kit CE-9069T and what seems to be a Rubicon Express yoke adapter and driveshaft (RE1807). I am not the original owner so I am digging all around trying to find a rear seal for the Tail end of my transfer case. I am not sure the...

I am trying to replace the rear seal on my transfer case and I have the exact same SYE you do. Did you ever figure out what seal fits it and what brand it end up being?

I appreciate your guys for the advice and input. I am just glad I asked before I did anything really stupid. I did learn a little more about my Jeep though. Now I know why my skid is the way it is and what a double cardon drive shaft is. Learning more every time I work on it.

Sorry what is a MML?

I have a 1.25" body lift I left in place. I don't have a lot of history on this Jeep or why they did what they did. Update: after doing some looking around it may be a UFC high clearance skid. I am guessing the spacer in the skid are to keep the trans & t-case from hitting but is has a body...

Today I pulled the skid plate to replace a rear seal and service t-case. I currently have the skid off and out of caution I placed a jack under the t-case. I will be getting the new seal Wednesday but most likely I won't be able to replace it until Thursday. I am a new Jeep owner and at first I...

Thank you! I did see several mention that as a best practice. It's good info for us newbies.

Yeah, I am right at 80K on it and have done plugs/wires/cap & rotor/O2 sensor/Throttle body & IAC cleanup/drilled some frame drains (frame it in perfect shape, but want to keep it that way)/ coolant flush and new radiator. Still need to do emissions canister & solenoid and all the fluids...

Well I have a TJ To-Do-List that seems to keep growing just because I want to do preventative maintenance as well as things that keep popping up from it just setting so long. I believe the original owner would start it up and pull it out of the garage but it hadn't seen really any miles in the...

I did do that in January, because the radiator needed replaced so I thought it was best to do it then!