Lax22
Reaction score
628

Joined
Last seen

Latest activity Postings Attachments Images About

    • Lax22
      Lax22 reacted to Irun's post in the thread It just happened! with Like Like.
      Also finished up the backside, including the installation of Blaine's taillights and license plate mount. After unpacking the lights, I...
    • Lax22
      Lax22 reacted to Sj's TJ's post in the thread SJ’s TJ with Like Like.
      Here is what I’m dealing with in terms of my driveshaft rub: As you can see I had this concern already and had moved the lower CA...
    • Lax22
      Lax22 reacted to Sj's TJ's post in the thread SJ’s TJ with Like Like.
      Ok, so I completed the shakedown run yesterday and I have some good news and some bad news. Bad news first. My drivers side front ORI...
    • Lax22
      Lax22 reacted to Sj's TJ's post in the thread SJ’s TJ with Like Like.
      Well the first shakedown run is officially on for tomorrow. I got her all loaded up on the trailer I bought: I’m heading up to Rausch...
    • Lax22
      Looking to see if anyone is selling a single black pro comp 69 series wheel. 15x8 with 3.75 inch backspacing. Thanks I. Advance!
      • IMG_4515.png
    • Lax22
      Lax22 reacted to Irun's post in the thread It just happened! with Like Like.
      Passenger side armor is done, for now. Next is the tailgate armor and lower valance. Everything will have to come off again to be...
    • Lax22
      Since there not installed yet, I would put them on a pair of jackstands with the diff cover pointed up and open them up to take a look...
    • Lax22
      Lax22 reacted to Sj's TJ's post in the thread SJ’s TJ with Like Like.
      Big milestone today. I finished the last large item left on the list. I still want to tidy up some of the wiring in the engine bay by...
    • Lax22
      Lax22 reacted to Sj's TJ's post in the thread SJ’s TJ with Like Like.
      One of things this past weekend was to figure out my engine skid. I have an aluminum UCF skid from before with the 2.5. What I didn’t...
    • Lax22
      Lax22 reacted to Sj's TJ's post in the thread SJ’s TJ with Like Like.
      One of the issues I was running into was setting up the idle in the Terminator X. It says the IAC value should be between 2-10 when at...
    • Lax22
      Lax22 reacted to Sj's TJ's post in the thread SJ’s TJ with Like Like.
      Makes sense given where you are in your build. Since I have a Turbo 400 with reverse manual valve body, I only needed the Terminator X...
    • Lax22
      Lax22 reacted to Sj's TJ's post in the thread SJ’s TJ with Like Like.
      I really does take the guess work out of a lot things and is extremely versatile. If you want to make more advanced tuning packages you...
    • Lax22
      Lax22 reacted to Sj's TJ's post in the thread SJ’s TJ with Like Like.
      I got the Terminator X installed and setup. I settled on the glovebox for the Ecu: I’ve got it all setup for the most part. Still...
    • Lax22
      Lax22 reacted to Irun's post in the thread It just happened! with Like Like.
      Here are the switches mounted in my TJ. I also made a bracket out of aluminum and mounted the pumps inside the cabin. The door strap...
    • Lax22
      Lax22 reacted to Sj's TJ's post in the thread SJ’s TJ with Like Like.
      I know someone asked how I was going to deal with the rear area with the shock towers poking through. Here is what I can up for now...
  • Loading…
  • Loading…
  • Loading…
  • Loading…