LHC30
TJ Enthusiast From Lake Havasu CIty, AZ
- Messages
- 163
- Reaction score
- 79
- Joined
- Last seen
- Viewing thread What are these magic numbers on the door jamb sticker?
Latest activity Postings Attachments Images About
-
-
I think I fit a thin zip tie through the fitting and pulled it tight. Has been that way for awhile now. Worth a try, -
LHC30 replied to the thread Trying to remove EVAP canister.Not yet, I need to get back in there and see what all needs replacing if the locking tab is not available
-
LHC30 replied to the thread Trying to remove EVAP canister.I hope I’m not jacking this thread, but I have that same connection (to the canister) where the white locking part is missing. The...
-
The OD off button says it is incapable of being relentless.
-
LHC30 reacted to TurboTJ's post in the thread Vibration / rotational noise after flat towing with
Like.
Good thing you caught it when you did because if it had seized up it would probably have destroyed the TC. -
LHC30 replied to the thread Vibration / rotational noise after flat towing.Turbo - you win the prize! Although the DC front DS looked and felt good, the vibes are gone!
-
Looking for some ideas regarding a slight vibration/rotational noise on my 05 Rubicon that starts about 35mph. It started after flat...
-
I don't either. It's training my passengers that's difficult. -Mac
-
LHC30 replied to the thread Sway bar Width Measurement?.Sorry for not posting but I’ve been traveling Yes, the SB is centered and I don’t have an identifiable issue other than the ends seem...
-
I was adjusting my front SB links today, when it seemed to me the SB ends may be more narrow than they should be. I do know the ends of...
-
LHC30 reacted to Mr. Bills's post in the thread Jerry Bransford is the talk of the town... with
Haha.
Fixed it for you. -
LHC30 reacted to mrblaine's post in the thread Jerry Bransford is the talk of the town... with Like.
There is a problem with that method. There are lots of issues that you can try to find an answer to and of 20 or so folks queried, 19 of...
-
LHC30 replied to the thread Help with upper control arm bolt.And, isn’t the lower arm up side down? My RC arms have the bend at the top, for ground clearance I believe.
-
I did Pike's Peak last month in my JL as my LJ was not ready for the trip. The only thing throwing codes was me...after about 30...
-
That is a rough bit of advice given to someone who on the face of it, doesn't seem to be the sort that would rework the bolt sleeve in...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…