Recent content by limeliam

Hey most likely I’m going to take out the camshaft sensor to verify I did it right. All I need to do is align the timing chain sprockets and the cam sensor drops right in right?

I’ll have to start at night it’s too hot in AZ rn lol

Thanks!

Just to verify, when reinstalling the cover, have them aligned up?

I lined it up but did not do any 360 rotations only a 1/4 turn and I did not take out the cam sensor. Since I’m going back in there after rotating it to verify the teeth work, when putting on the cover does it need to be lined up again on those dots? And should I take out the sensor? Thanks

Man, looks like I may just have to tear it all apart and redo it unfortunately. After installing new fuel pump, timing chain, and harmonic balancer it seems to have all sorts of issues. I first stated the jeep and it would sputter then start for about 3 seconds then die giving those codes. I...

When you mean When you mean check the timing are you referring to when I installed them and lined up the two marks on the sprocket?

Also, I will note that it did sputter when trying to start it, midway through starting it would just randomly go for about 20 seconds then die.

I just finished installing my new timing chain and when I reconnected my battery and alternator my jeep threw these codes. I checked and my alternator red and black wire seem fine no issues with them being secured. Then I checked the plug on the firewall that has my coils and it seems okay? Any...

Thanks

Thanks👍

Since I am doing my cooling system and replacing harmonic balancer I decided to do my timing chain. Question, do I need to oil up the gears or chain when replacing (if so what oil/lube is recommended)? When reinstalling the cover do I need to rtv the gasket or do it dry? When reinstalling...

Maybe when I tighten it, it will stiffen up? Im at work so I will have to try in the morning to get it with a strap wrench

TRQ, got it off of extreme terrain

There is not