Latest activity Postings Attachments Images About
-
-
Got the last two holes drilled for the transmission cooler. I used the self tapping screws from the heat shield. Got the cooler... -
MichaelGH replied to the thread Power Mountain Tallboy Off-Road Jack.I just purchased it a few minutes ago, at the better price. Thanks for the heads up, guys.
-
-
MichaelGH reacted to JeepStream's post in the thread Power Mountain Tallboy Off-Road Jack with
Like.
As I’ve done many times before with a new-to-me vehicle, I’ve started building a list of all the things my new LJ “needs”. A jack jumped... -
What the hell ... I gave it a shot: https://www.extremeterrain.com/jeep-wrangler-tallboy-off-road-hydraulic-jack-50015.html
-
MichaelGH reacted to NashvilleTJ's post in the thread Power Mountain Tallboy Off-Road Jack with Like.
Chinese Patent Infringement! ;)
-
MichaelGH reacted to DeltaNu1142's post in the thread What have you 3D printed for your TJ? with Like.
I made these so I can use my Sunrider top without the stupid door surrounds: More info in this thread.
-
The original tail lights for my 2002 Wrangler TJ were starting to fall apart so I decided to get a set of more modern looking LED...
-
Tomorrow is my 64th BDay... My daughter has to work tomorrow so she's giving cake 🎂 and stuff today...
-
Thank you for the pictures.... That clarifies where the problem is....
-
MichaelGH reacted to DeltaNu1142's post in the thread What have you 3D printed for your TJ? with Like.
These mostly came out as intended. I thought the zip ties would hold them down tighter, but they're not going anywhere. I couldn't do...
-
MichaelGH reacted to DeltaNu1142's post in the thread What have you 3D printed for your TJ? with Like.
Profile test for filler panel. Still have some tweaks to make. Depending on how this gets integrated into the deck, it'll either be...
-
MichaelGH reacted to DeltaNu1142's post in the thread What have you 3D printed for your TJ? with Like.
I've been iterating designs for a rear anchor point for the Bestop NX soft top: This is pretty close to final, printing now...
-
MichaelGH reacted to DeltaNu1142's post in the thread What have you 3D printed for your TJ? with Like.
Here's a quick one... rear seat belt retainers for the roll bars. Should cut back on the flapping. They'll be held on with tarp bungees...
-
I've always disliked the hooks under the tub rail. Never got it tight enough and it would unhook when the top had less tension on it...
-
Hey all, it’s been a while, but I felt like sharing that I finally took care of my rear upper perches on my ‘97. Took about 5-ish maybe...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
