Latest activity Postings Attachments Images About
-
-
Hit the key with the palm of your hand (or a rubber mallet) driving it towards the column. I’ve got to do this occasionally with my XJ. -
PattonD replied to the thread Early 97 Ignition Key Cylinder - Different that later 97's?.Based on RockAuito, This looks like one of the things that early 97 MAY be different from later 97 and not carried on to 98. The good...
-
PattonD replied to the thread Early 97 Ignition Key Cylinder - Different that later 97's?.I just sent them a note asking if they can get me the right part.
-
PattonD reacted to macleanflood's post in the thread Early 97 Ignition Key Cylinder - Different that later 97's? with
Like.
I've got an early 97 with half doors. I ordered a complete kit from Wolf Security and it fit perfectly... -
PattonD posted the thread Early 97 Ignition Key Cylinder - Different that later 97's? in TJ General Discussion.Due to my stuck key, I am about to order the Ignition Lock Cylinder for my 97 TJ. The Dorman unit for the 97 is OOS for most places...
-
-
Went out to take the TJ to the shop to try to figure out if I’ve got a problem with the voltage regulator in the PCM or the alternator...
-
PattonD replied to the thread Early 97 TJ Check Gauge Light (but went away) - Hard to Start - Voltage at 12V.My battery charge has an alternator test, but how does it know if it is the alternator or voltage regulator in the PCM? Due to the...
-
Put the ac on max and see if it cycles like that or on vent without ac. You're probably low on coolant though.
-
It sounds like your ac compressor turning on. Pop the hood and go watch the clutch kick in with the sound.its short cycling so you are...
-
PattonD replied to the thread 97 TJ has a strange hum every 10 seconds.It’s not charging, battery is good so it’s alternator or computer.
-
Our 97 got a check gauge light (off now), difficult to start and not charging. Went out to put the OBD2 reader on it (no codes) and...
-
PattonD replied to the thread Can't find the correct blower motor switch for my 97 TJ?.If we can track down a wiring diagram for these early cars, I would be more than willing to rewire to just have high and low if I knew...
-
PattonD reacted to JKP's post in the thread Early 97 TJ Check Gauge Light (but went away) - Hard to Start - Voltage at 12V with Like.
Your Jeep has a Powertrain Control Module, PCM. The voltage regulator is in the PCM. I would have the alternator and battery tested...
-
PattonD posted the thread Early 97 TJ Check Gauge Light (but went away) - Hard to Start - Voltage at 12V in TJ General Discussion.The daughter was driving our early 97 TJ, and the check gauge light came on; she looked and could not see why. When I went to start...
-
PattonD reacted to 97TJ_305's post in the thread Can't find the correct blower motor switch for my 97 TJ? with Like.
Standard S1044. I didn't buy from O'Reilly but this seems like the same part...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
