Recent content by raphaelchicago

  1. raphaelchicago

    Has anyone purchased a Canadian TJ before?

    i just removed my drl module on my tj its against the drivers side on the fire wall small black box. I removed it my leds dont flicker but i also dont have a highbeam indicator doesn't bother me much though as with the leds you can definitely tell when you highbeams are on. Rust would be my main...
  2. raphaelchicago

    P0016 (cam / crank correlation) and P0344 (camshaft postion sensor intermittent)

    Shit from Israel aha your scaring me I wanna go wheeling this weekend. I got a new odpa on order and new crankshaft sensor just to be safe.
  3. raphaelchicago

    P0016 (cam / crank correlation) and P0344 (camshaft postion sensor intermittent)

    I'll have to use the new mopar sensor I got I'm just waiting for the part to arrive for the new odpa my original mopar one broke the tab to hold in place off. Hope my cams alright.
  4. raphaelchicago

    P0016 (cam / crank correlation) and P0344 (camshaft postion sensor intermittent)

    I'm going to pull the opda looks like someone tried to open the cap and stripped the torx bolts previous so that'll be fun. I'm upgrading to the crown whenever it arrives from shipping after research I think that's it. I just hope my camshaft is okay. I'll keep you guys updated.
  5. raphaelchicago

    P0016 (cam / crank correlation) and P0344 (camshaft postion sensor intermittent)

    I have a 2005 Rocky Mountain Edition with a 4.0L & 6spd. I've been getting P0016 and p0344. I changed the camshaft sensor twice now I had trouble initially getting a mopar sensor but i have a new mopar one in there now and still getting the codes. The p0344 only activates if its cool outside or...
  6. raphaelchicago

    Can anyone recommend a good replacement fuel pump?

    I need to replace the fuel pump I believe in my 2005 4.0l tj. I get hard starts sometime when it sits for a while and after filling up the tank starts fine throughout the day other than that. I think the check valves have gone and it takes a while for the fuel to get back to the injectors not...
  7. raphaelchicago

    I want to regear and add lockers

    Im buying the parts from 4wp and getting them to do the work.
  8. raphaelchicago

    I want to regear and add lockers

    Yes, I will be giving it to a shop. Ive done all the work on my TJ up to this point but i just movewd here have none of my tools shipped here yet so ill be just giving it to 4wheelparts to do the job
  9. raphaelchicago

    I want to regear and add lockers

    This is what i came up with is there anything im missing from my list before i order later this week?
  10. raphaelchicago

    I want to regear and add lockers

    I live in Calgary, Alberta just moved here but i often drive back and forth to Thunder Bay, Ontario about 2100km away. Thankyou for the info on the rear dana its always a good thing to find out you got a better diff than you thought.
  11. raphaelchicago

    I want to regear and add lockers

    I believe i have a dana 30 in front and dana 35 in back can anyone confirm i was looking up the specs for rocky mounitain edition, but its saying i have a 44 in the back. I also check for the tags for ratio but i must've forgot to put em back on when i resealed them.
  12. raphaelchicago

    I want to regear and add lockers

    What re gearing comittee?
  13. raphaelchicago

    I want to regear and add lockers

    I was considering converting to the 5spd by purchasing one from Novak Conversions. Should i consider a 4.88 kit?
  14. raphaelchicago

    I want to regear and add lockers

    I have a 6 speed 2005 Jeep tj running 35inch tires with a dana 30 in the front and dana 35 in rear 3.07 current axle ratio. I do mostly highway driving, but do hit the trail when i can. i also live in Canada so the winters often give me a 4x4 playground. What would i need to regear to 4.56 and...
  15. raphaelchicago

    P3044 code: Engine goes into limp mode

    Camshaft position sensor intermittent