Recent content by Sharpermd

  1. S

    A/C Low Pressure Line Clips

    I'm frustrated that I can't find the answer to this seemingly easy question. On my 2003 Wrangler X, there are two clamps that are supposed to secure the low pressure line of the A/C to the inside of the engine bay (passenger side, just next to and in front of air filter). Can anyone tell me...
  2. S

    Do the 03-06 tailgate hinges fit on 97-02 models?

    In my experience, no. I recently purchased a 2006 tailgate with hinges from a salvage yard to replace my 2003 TJ tailgate. The tailgate itself fit perfectly, but the newer hinges attached did not. The problem seems to be where the newer hinge bolts to the rear fender. The newer fender has a...
  3. S

    What size bolts hold the speaker pods onto the roll cage?

    I happen to have my 2003 TJ Speaker pods off for repainting (waiting for the rattle can to arrive), and with my tap and die set, the stock bolts I have are M7x1.0. Please note the "hat" shape to the washer/insert, I'm not sure where to get this separate from the bolt. Hope this helps!
  4. S

    WTB: WTB Savvy Shift Cable NP231

    Will do. But I confess I don't know how to send a PM! Give me some time, I'll figure it out tomorrow.
  5. S

    WTB: WTB Savvy Shift Cable NP231

    Not a Savvy, but if you are still looking, I have a Novak #SK2XC Cable Shifter Assembly sitting in a box at the office. New, never installed. All parts should be there (as it's at the office, I'll have to confirm Monday morning!). Would be happy to let it go for $140 + shipping. Just let...
  6. S

    SOLD 2000 Jeep Wrangler Sport - Complete Part Out

    I would happily take one or both windshield wiper arms (only need one, but would understand if you want to sell pair). Shipped to 46032?
  7. S

    2003 TJ kick panel removal

    Just one more step in my quixotic quest to paint the interior plastic panels!:p
  8. S

    2003 TJ kick panel removal

    Thanks to everyone who responded! This is a great community. It turns out that everyone was correct. The front attachment was a push-style washer attachment, and the rear attachment was a phillips head "screw" that was inserting into a plastic push style attachement! Not sure what was...
  9. S

    2003 TJ kick panel removal

    Thanks for the input. I think mine is secured with the single-use retainers, unfortunately. I think I'll attack it with some needle nose pliers and hope for the best!
  10. S

    2003 TJ kick panel removal

    I'm trying to remove the interior plastic panel that sits under the driver's side sill. I am not even sure what to call it , but it seems to hide the wireing cable that extends to the rear of the Jeep. The existing one seems to be twisted somewhat and half removed from the PO, and I can't tell...
  11. S

    Help with lifted TJ

    As an update....I had the wheels balanced today and an inspection performed. Sure enough, one of the ball joints is bad, as are the tie rods. Bad news is the car is even worse after the inspection/balancing (technician said it likely had to do with putting the car on the lift ?), and I had 3...
  12. S

    Help with lifted TJ

    Thanks! I do have a shimmy at around 40ish mph, and although it isn't terrible, it does seem to be one of the things that I notice just before "death wobble." I'll give the local tire shop a call today!
  13. S

    Help with lifted TJ

    Thanks for the responses! Unfortunately, bought the oem track bar, so hopefully I can return it. Cheers!
  14. S

    Help with lifted TJ

    Recently bought a 2003 TJ with 33 inch BFGoodrich tires. The ride is terrible, and I've had a 3 "death wobbles" in the last 2 months. Although I was told the wrangler was not lifted, this is what I see when I look at the front suspension. I am sure I will need some suspension work, and have...
  15. S

    What kind of lift do I have on my TJ?

    Sorry dupicate..