SkylinesSuck
TJ Expert 40 From Northern VA
- Messages
- 3,039
- Reaction score
- 2,914
- Joined
- Last seen
- Viewing thread Replacing the interior lights of your Jeep Wrangler TJ with LEDs
Latest activity Postings Attachments Images About
-
-
SkylinesSuck reacted to Irun's post in the thread A lesson learned—keep it light and nimble! with
Wow.
Well here's a new one on me. This weekend I had the Jeep out and needed to do a panic stop. I was barely able to stop before rear ending... -
SkylinesSuck replied to the thread Oil pressure drops when stopped.Swapping out the oil pressure sensor for a new Mopar unit might bring some of your guys pressure readings back into spec. For the cost...
-
SkylinesSuck replied to the thread Proper break-in for new rocker arms and pushrods?.Yep. Rocker arms + push rods only = send it.
-
SkylinesSuck reacted to williambmac's post in the thread Proper break-in for new rocker arms and pushrods? with Like.
There is no break-in procedure for rockers or push rods. Apply some oil or assembly lube to the push rods and rocker fulcrums, assemble...
-
SkylinesSuck reacted to Irun's post in the thread A rear main seal that is giving me fits! with Like.
I was helping a buddy on his Jeep. We had already done the RMS 2X (with a FelPro RMS). This time we used the traditional FelPro OPG, but...
-
SkylinesSuck reacted to JeepOnDecision's post in the thread Toyota lights on your TJ! Cheap, quality LED alternative with Like.
Hella H4 100/80 back in stock at Qtec for $2 each. My order from December just shipped
-
SkylinesSuck reacted to Wildman's post in the thread 98 TJ engine swap 2.5 to 4.0 or 4.7 stroker with Like.
Sorry to hear about your son, your family will be in our prayers. IMO for the amount of work it takes to swap in a 6 cyl you could of...
-
I have stitches in my neck right now so I can't crawl around under the jeep to fix whatever is going on with my clutch. So I decided to...
-
My axles are done. I now have 4.56 gears, Torq locker in the front, and a TruTrac with 1541H axles in the rear. I also have new 760...
-
SkylinesSuck replied to the thread Mirror camera.I had one on a different vehicle. Loved it.
-
A couple of 1/8” diameter holes either side of the crack and mechanics wire or good quality zipties would sew that back together in...
-
I've removed the shroud without the radiator, I don't think that's a thing.
-
Harbor freight plastic welder will fix that.
-
You have a "real" oil pressure gauge, which is supposed to vary with engine RPM. The engine revs higher, the oil pump spins faster, the...
-
SkylinesSuck replied to the thread Help Diagnosing Engine Knock.After breaking many things, one thing I can say is that things can break weird. No telling until you get a good look at what's going...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…