Latest activity Postings Images About
-
-
Update on JCR sliders. There are at least 6 things to fix on these. You might consider modifying the Genright Mini Boat Sides or TNT, or... -
I have both, small for lockers and large for tires. When I was getting my lockers done, everyone said I was crazy to send the extra cash...
-
I got to install a set of Savvy sliders on mine today. This is my first time being able to really study Blaine's design. Something that...
-
Steelyace replied to the thread Is this new gear sound normal or not?.😂. Yes and yes 😂. Had to get the shims correct for the bearing spacing for the correct preload. And I understand checking..
-
Steelyace replied to the thread Is this new gear sound normal or not?.The very slight hum I hear when coasting? Again, I'm probably being hypocritical. Nothing to be concerned about at this time? Maybe...
-
my only experience with regearing is from several youtube videos that I just watched in the past couple days primarily because I think I...
-
Steelyace reacted to hosejockey61's post in the thread Is this new gear sound normal or not? with
Like.
Don't touch it, it's fine. If anything I would say pull one or two thou..... But don't. Your good. 👍 -
Steelyace replied to the thread Is this new gear sound normal or not?.I understand what you're saying. If you take a look at the second picture you can see kind of the ghost pattern that might help some...
-
-
Steelyace replied to the thread Is this new gear sound normal or not?.Revolution gears. Preload was set @17 with about 190 ft/lbs of torque. Backlash was 7. And I will include my final pictures of the...
-
-
Steelyace replied to the thread Is this new gear sound normal or not?.I have 80W-90 conventional in there right now and I haven't been through the break in period yet. They literally only have 6 mi on the...
-
Finished installing new 5.13 gears and lockers in a Dana 44 and a 30, went great with the help of some very very knowledgeable members...
-
Steelyace reacted to GCole's post in the thread Gear pattern check - Dana 35 with 4.10 gears with Like.
So just wanted to close this project out by saying that I finished reinstalling my re-geared Dana 35 today and took it for a short...
-
Steelyace reacted to DougyintheBushies's post in the thread 4.56 or 4.88 gears with NSG370 34 inch tires with Like.
I wish I went 5.13 cause the crappy nsg370 will be swapped for an ax15
-
Steelyace replied to the thread 4.56 or 4.88 gears with NSG370 34 inch tires.Look at some vendors that sell them. When they were out of stocks of 5:13s I was able to get a set through poly performance. They...
-
Steelyace reacted to Longwhitejeep's post in the thread 4.56 or 4.88 gears with NSG370 34 inch tires with Like.
I'm headed towards 5.13 with the 6 speed based on feedback here with 35s. The issue of course when I'm now ready to order is revolution...
-
-
Loading…
-
Loading…
-
Loading…
