Recent content by StefTCK

Having a hard time finding a part number for this part of the gas tank. Just noticed the smell of gas and noticed the damage to the plastic here. Can anyone point me in the right direction?

*If this is against forum rules, I will delete it. Couldn’t find anything on sharing this Hey everyone! As kind of a passion project, I decided to start an automotive blog. The focus is on enthusiasts and our shared interests in cars and projects. Please check out Theclutchkick.com as I...

Haven’t finished it, some stuff came up but I am gonna go the route of cutting the drivers side bolt and replacing it with a new one. Gonna tackle it on Thursday and hopefully get it done! Just to clarify, everyone’s been putting a long piece of wood underneath and not just a small block?

Thanks everyone. I did get the ones with the rubber. I had my experience with polyurethane when I had my tuner car, don’t need to have a massage chair again lol Gonna try manhandling it a bit and gonna try and get a friend to help out with the alignment. Hopefully I get it done right before I...

By blocks do you mean the 1” lifts like rough country sells? Why would the MORE mounts produce more vibration?

Hey everyone, Just finished installing the savvy body lift and being that I want to put in a tummy tuck and reduce vibes, I am in the process of installing a set of MORE motor mounts to compensate for the lift. Problem I’m having is that no matter what I do in terms of loosening bolts and...

I started my Savvy Body lift and MORE motor mount install. Body lift was smooth but the motor mount is a b**** and a half. Can’t even get the passenger side off because the top frame bolt decided to not want to budge at all. Hit it with some WD40 and gonna wait overnight and hope it’s easier...

Did you bleed all of the air out of the system after switching out the coolant fluid? That was the solution for multiple of my radiator related problems.

I'm trying to understand the post but if you're talking about putting Porsche wheels on a jeep, I don't believe the lug patterns match up.

I just did the overhaul and had the actual stant part so it might have been a mix up, unless motorad has the same quality. It'd probably be good to go regardless if the seller won't refund you.

This is exactly what happened to mine. Tape it up and it'll work again.

Got all the air out and now the temp gauge doesn't go past the "0" in 210 even in 100 degree weather. Thanks for the patience with my novice skill set and for the tips!

Gonna try bleeding the cooling system again since after further research I figured out I didn't do it long enough. No coolant in the oil or other bad signs. Overall it's been a frustrating process but it's been good for me since I plan on keeping this jeep for a long time. I appreciate the...

Well got everything changed out with Mopar parts and the cooling system still overheats. I used all of the parts recommended in the cooling overhaul. Coolant is bubbling like crazy so I'm trying to figure out my next move. I'm thinking maybe I didn't bleed it enough/properly? Edit: Heater...

I had the same issue and it was the balancing on the tires. Once that was fixed, jeep drove smooth.