Latest activity Postings Images About
-
-
For $2600 you can buy your own parts and tools do it yourself and gain some knowledge and experience. -
Thomas-2005-LJ reacted to Chris's post in the thread Congratulations to nathanaelward, the March 2023 Ride of the Month (ROTM) with
Like.
Congratulations to @nathanaelward on winning (again) the March 2023 ROTM contest! Enjoy the prizes! -
Thomas-2005-LJ replied to the thread Stripped front oil pan bolt.I know it's a few years old, but I'm so glad I saw this post before I went and changed out the timing cover.
-
Thomas-2005-LJ replied to the thread How I fixed my front seat belts.I know this is an old post, but I found this while trying to find a fix for a highly sensitive seat belt retractor. The fix that is...
-
Thomas-2005-LJ replied to the thread Initial Alignment.As always, thank you for the guidance.
-
A 40" long piece of square aluminum tubing marked at the center and at its 35" diameter marks is cheap and pretty darned easy so you can...
-
Thomas-2005-LJ replied to the thread Initial Alignment.Thank you for the input. I'm glad I was at least in the ballpark.
-
That wasn't the point which was any error made while measuring at 24" will be magnified at 35". It's easier to get a more precise...
-
If you do the math, 1/8" at 24" = .298° Sounds about right to me.
-
Thomas-2005-LJ replied to the thread Initial Alignment.The TMR brackets are only 24" long. I see what you're saying regarding the length of the bracket. Moving forward, I could definitely...
-
Your toe-in should be measured at the same points the tire's outer diameter would be at. 1/8" at your measuring points would produce...
-
1/8” toe gets you in the ballpark. That is what I shot for after installing the Currie Currectlync, but it is always advisable to bring...
-
Thomas-2005-LJ replied to the thread Initial Alignment.I thought I had the toe 1/8" in. I bought the TMR brackets and did that part as described in a few threads.
-
-
I've never done an actual alignment but I am fairly familar with what is supposed to be what. It looks like you weren't too far off and...
-
I replaced control arms, springs, shocks, track bars, hub assemblies, axle shafts, Currectlync HD Steering, SYE, and installed an...
-
-
-
Loading…
-
Loading…
-
Loading…
