TimV
TJ Enthusiast 53 From Ontario, Canada
Latest activity Postings Images About
-
-
TimV replied to the thread Buying a Jeep.We purchased somewhere around the 220k mark. -
TimV replied to the thread Buying a Jeep.My. 02 with experience: My wife's Wrangler is a 2007 JKU with the 3.8L. It's at 260k kms. The engine working just fine, so far...
-
Or just pull the two metal rods out of the hogs rings and then slide them into the cover on the new seat foam. Easy.
-
We mentioned on this forum we would see if we could place an even larger heater core in the 2002-2006 Jeep wrangler heater core space...
-
TimV replied to the thread Evap Fitting on Gas Tank.Suggestion: get an inch of small brake line. Drill the plastic out just enough to insert the brake line snugly. Final assembly with an...
-
-
TimV reacted to melbguy1985's post in the thread Dorman shift tower kit 697-025 for 05-06 4.0 with
Like.
One thing I forgot to mention- if you get one of these throw some gear box oil into it to coat all the inner workings before you bolt it... -
42 inches of new snow this week! I told the wife I was going for a drive and getting gas. Almost didn't head to the woods after filling...
-
TimV replied to the thread Intermittent misfire and rough idle (2005 Wrangler X 4.0 Automatic).That's one heck of a fine job you've done here. And a darn fine write up to boot. Kudos and thank-you. By and large this is an...
-
TimV replied to the thread Connecting winch leads to stock battery terminals.Heh heh, that is a valid frustration.
-
TimV replied to the thread Connecting winch leads to stock battery terminals.The ⅜" was in part existing cables sized for ⅜ and secondly, I aim to build/modify with ⅜ fastening as much as possible in an effort to...
-
-
TimV replied to the thread Going from 4 inch heels to original slippers (posting as I go).Thanks for the great write ups 👍🙂 I have admiration for people with a good get-at-it attitude. You display that in spades. Good on you...
-
TimV replied to the thread Connecting winch leads to stock battery terminals.Fair questions. On the accessory bolt, the bolt head and nut were off size. Meaning a wrench couldn't be used properly, on either head...
-
TimV replied to the thread Connecting winch leads to stock battery terminals.I purchased those exact terminals once. Definitely 2nd rate stuff. Works if compromise is in your range of acceptable but, ya, 2nd rate...
-
TimV replied to the thread Why is the NSG370 so hated?.I thoroughly enjoy mine. So far.
-
Whelp, my cheapskate nature won. Cleaned the fracture with a stainless brush and copious brake cleaner. Mixed up some high temp JB weld...
-
-
Loading…
-
Loading…
-
Loading…
