Recent content by TonyArms

I wouldn't mind having those wheels

I have a 13mm 12 pt in my toolbox as well for the same reason.

If those are 1/4 " drive sockets you might want to get 3/8 drive.

I learned how to pull a calf on youtube. ;)

From my experience right turn noise means you have a bad left front hub. It might not be to a point you can feel it while spinning the wheel off the ground but give it some time and it will get worse.

Different areas have different light colors. By me blue is fire, red is police.

I've never experienced any hate for whatever I drove.

I have the same issue, I just reset the trip meter at fill up and refill at 175 miles on the trip meter.

Could be fuel pump noise if you hear it with key on before you start it.

Absolutely ! Homebrew is a multi-faceted term. Although I don't mind when by neighbor brews some clear and shares.

Ever since I unlifted my tj with stock height springs and shocks the alignment has been out of wack and pinion angle was off. I've read a lot of posts here on at home alignments with the description of what tools were needed and such. My goal was adjust pinion angle , toe in and center the...

Still waiting for the ice to melt so i can open my door without ripping the weather stripping off. 😒

I found some pictures of the tub on the replacement frame, love the stock 205/75/15 tires i was using to roll the frame around.

Any chance the multifunction switch is user serviceable ? Can you take it apart and clean and regrease ?

My TJ plus studded winter tires is a good combination for what on the ground today. Pulled three car back onto the road this morning.