Latest activity Postings About
-
-
Tronner replied to the thread Axle u-joint c-clip help.That is the clip you are looking for, as you suggested, penetrating oil and heat will both help. I found using a vice to hold to DS and... -
Book of Owners Manual, Pg. 202 Verse 10: "And Lo! Thou shalt fine the Fuse of Cluster Instrumentation in cavity 10 of thine fuse panel...
-
Tronner replied to the thread Cant find oil leak location.If it is not coming from the RMS, looking higher that would indicate a valve cover leak at the rear of the valve cover. Edit: I see you...
-
Tronner replied to the thread Leather Steering Wheel Restoration.A word of caution on the Poland wheel. If you over tighten the retaining bolt that keeps the wheel pressed on the splines, you are...
-
I also thought 03-06 were the same but actually its 97-02 / 03-04 / 05-06 Yes the first pic is from the 06 the bottom is the 03. From...
-
Tronner replied to the thread Fuel tank help.Quick E-Bay Search shows these two tanks are very different. I think you will need to find another 03-04 tank. What is wrong with your...
-
Tronner replied to the thread Fuel tank help.I was not aware that the Tanks from 03 to 06 were different. My assumption would be they are compatible. The first pick, That is the 06...
-
Tronner replied to the thread Frame side front track bar - is there a sleeve?.Ahh understood. I agree there, If all else fails, then rebuilding the Currie bar would be best.
-
Tronner replied to the thread Frame side front track bar - is there a sleeve?.I would avoid that one, as it changed the steering geometry and the parallelism of the Drag link and the Trac Bar. Looks to me like you...
-
Tronner replied to the thread Frame side front track bar - is there a sleeve?.I would do a Quick Google search on 'Tie Rod Taper Sleeves' Commonly they are used on Knuckles that have been drilled out for Heims or...
-
-
Loading…
-
Loading…
