Recent content by Turdworlder

  1. Turdworlder

    Engine and whole car shakes

    my engine and whole car shakes, no cel. it also smells gasoline very bad. i can hear sounds like valve work from exhaust, i tried to listen with wooden stick engine block parts here and there no sounds at al beside the sound fromnexhaust, i opened the valve cover, no broken valve springs, all...
  2. Turdworlder

    Re-gear after transmission swap

    After 32rh to ax15 i still run my 32rh rear gears. In city traffic driving its very rare i have any chance to go 4 th gear. 3rd is very long. 1st is very short. Which number gears should i put? I dont like big tires. Fat wide tyres like those on bmw x5 but not big agressive tyres
  3. Turdworlder

    Aw 4 tcu less control

    So after naysaying about japanese engine swap here. I am thinking about aw4 instead of current ax14/32rh. The problem is we dont have any good autoelectrics, i know some jeepers here use mitsubishi delica tcu with aw4 combo but thats too much for me. Is the trick making aw4 work without tcu...
  4. Turdworlder

    Japanese engine swap

    Any non usa posters here thinking about or had experience with japanese engine swap? Us engine spare parts are unicorn here and after auto to manual swap i dont like the jeep at all. Gears are very long overall dont like both engine 4.0 and ax15 tranny. I want to swap 3-uz. I will be doing the...
  5. Turdworlder

    Turdworld engineering

    In scarcity of spare parts i have to cut the edges. The oem clutch line is bad quality rubberized plastic, i couldnt find any at local autojunks. Not even that connector that connects line ends with cylinders. So i ended with these. Local tractor hose maker made. Also i bought chinese cps that...
  6. Turdworlder

    Burnt valve or injector

    So it turns out my catalisator is okay, i will cut out it anyway. Now the doubt is its either burnt valve or one or two injectors not working. The muffler produces the close to burn valve sounds but it doesnt suck the paper back to muffler. Its more like very poor performing machine gun sound...
  7. Turdworlder

    How can I tell if my catalytic converter is bad?

    Is there any method to assure that my cat is clogged when there is no cel?
  8. Turdworlder

    Dead engine sound

    Hi, so engine makes this strange sound. I cant describe, more like choke or something. Is it dead engine or bad cat? It also started shaking. Starts wothout problem, idles normal.
  9. Turdworlder

    Need help wiring

    I lastly managed to end all the small mechanical stuffs on my auto to manual swap. I do it alone after my job. I looked up all internet write ups on internet but my wiring looks like it was previously manually rewired the connectors deleted under hood. I plugged the nss into its previous...
  10. Turdworlder

    Tranny swap wiring

    So i did all the mechanical stuff regarding to 32rh to ax15 swap. Now the only remaining thing is wiring. I am not an electrician. Know nothong about it. So here are the wires from nss and tcc. I want to start the car. Which wires should i connect to each other(splice???) Which wires should be...
  11. Turdworlder

    Evap delete (not USA)

    So not everyone in this forum is from usa. I want to delete the whole evap system. Already throwed the cruise control into trash. We dont have evap check like in usa. What is the most proper way to delete it? I m 90% sure it is giving me stalls. The car is okay when its lukewarm temps outside...
  12. Turdworlder

    Do I need a manual transmission skid plate for 32RH to AX15 swap?

    So i installed the ax15 instead of dead 32rh. The transmission mount is from manual ax15 doesnt want to marry with 32rh skid plate. Do i need manual skid plate also? Eventhough i gooogle for "manual jeep tj skid plate" it keeps showing the skid plate now i own. Is there any difference between 2...
  13. Turdworlder

    Bellhousing bolt length

    I have a question regarding ax 15 bellhouse to block bolts. I took off the 32rh because it died, no way i can find rebuild kit and torque converter here, even inch bolts are unicorns here. So my question is do i need only 2 top bolts in my swap? From videos i noted that two top bolts with...
  14. Turdworlder

    Ax15 swap

    I am at the middle of 32rh to ax15 swap, yeah i know 32rh is better but it died. Shipping costs overseas from the usa raised like 1000%. When i release the gas pedal on uphill upmountain drive it dies, it shakes like a washing machine without shocks when put into gears, also makes all kinds of...
  15. Turdworlder

    O2 Sensor Simulators

    Mine has no 2 precats from factory. On vin code history it seems like the very first owner had special tj for export order. It has all the lixuries like cruise control, ac etc but no precats and o2s. Only one o2, cat near transmission. Want to remove it.