Recent content by txfiremn

  1. txfiremn

    Oil Pan Support - Mopar (53010511AA)

    I had to go back and look, that's crazy! I would definitely call and see what's up with the shipping cost.
  2. txfiremn

    Oil Pan Support - Mopar (53010511AA)

    Let me know if it works.
  3. txfiremn

    Oil Pan Support - Mopar (53010511AA)

    Is this part from the Cherokee interchangeable? https://jeeppartsoutlet.com/2000-jeep-cherokee-se-gas_2.5_4-transmission_manual_5-engine-engine_parts-oil_pan_support_J3243116-item/
  4. txfiremn

    Replacement sound bar speaker grills

    If you're just needing the grills, I still have my stock grills from my 2002. Pay shipping and you can have them.
  5. txfiremn

    Whats the final verdict on fender flare restoration?

    My flares were very dull and faded when I first bought my Jeep. I had bigger priorities to conquer before replacing them with armor, such as rebuilding the transfer case and replacing the cracked head. So, I took the Plastidip route. I can say it looks a ton better, but by no means would I say...
  6. txfiremn

    Any bass fisherman on here?

    Nancy Marie maybe?
  7. txfiremn

    Any bass fisherman on here?

    I fished the Long Island Sound for the first time this year and had a blast. I normally bass fish 2-3 times a week.
  8. txfiremn

    Healtech Speedohealer Question

    I calibrated my speedometer with the Healtech Speedohealer. So far it works great. My problem is that i calibrated it when I had 31's but I recently upgraded to 33's. Do I need to reset the speedohealer back to zero to recalibrate for the 33's or just go back through the process again using...
  9. txfiremn

    Back in a TJ Build

    They called them Stripers unless you use auto correct, then they are called strippers!
  10. txfiremn

    Back in a TJ Build

    I've been pretty busy here lately with finishing up seasons of select baseball and softball. I also just returned from New York for an amazing fishing trip. So, I haven't been able to post an update recently. I've been able to do a few small things to it. First, its running great after getting...
  11. txfiremn

    Back in a TJ Build

    The shop called today and said they did a compression test and cylinder #2 had 60 pounds and leaking from there. So, now I wait for the valve job...
  12. txfiremn

    Back in a TJ Build

    I never could get the rough idle to go away. It did show P0300, 301, and 302 codes, which are miss fire codes. I replaced the plugs, coil rail, and all 4 O2 sensors. I decided to take it to a mechanic that we have used for years. Hopefully, they can figure out what is going on. So, here she is...
  13. txfiremn

    Rough Idle With P0300 Code

    I'm sure it has nothing to do with the misfire but I'll definitely add more. It's it's in-between the full and add "safe" area with the hash marks.
  14. txfiremn

    Rough Idle With P0300 Code

    I have replaced all 4 O2 sensors using the NGK brand sensors. It seems to idle rougher when it's put in gear but is way better now since I topped off the transmission with 2 quarts of atf. I also replaced the spark plugs with the OEM NGK plugs gapped at .35. Last night the check engine light...