So I have an electric fan and as I was doing some wiring to the PDC, I noticed the fan relay socket was on the verge of melting. The worse side is from relay to fan, and the side from fuse to relay looks to have gotten hot too. I used a 30amp fuse, though I am not sure if that is the correct fuse, and 14ga wire that is roughly 12-14’ from relay to fan. The fan wiring from Flex-a-Lite is roughly 14ga as well. The socket was some cheap ebay socket, but was an OEM relay. The rest of the connectors in the system are fine. Is this a matter of a crappy relay socket, too high of fuse, too small of wire or something else?