Help with broken arm on Bestop soft top

Joeinnewjersey

TJ Enthusiast
Joined
Jul 3, 2020
Messages
291
Location
New Jersey
Any way to get a replacement for this arm other than calling bestop? Or any homemade fixes…

FAE276B3-DCA0-4E23-89C5-E72225D6A3A2.jpeg
 
Check Facebook, you can often get a complete frame for ~$100. Plus Quadratec has decent frame parts diagrams.
 
Call Bestop their customer service is top notch
Yes, call Bestop. I had a TrekTop for a bit. During installation, I ripped the stitching out on one of the little tabs in the rear corner. I called them, told them that I thought it was my fault and they still sent me a new window and told me to keep the old one.
 
Hell I bought a used soft top off the forum but it was still like new and they warrantied me a couple things. They’re the bomb
 
You need the header, the arm is fine. Take the phillips screw out, detach the arm, and you can epoxy the post back in the header. Put the arm back on after the epoxy hardens and it will work for a little but, but it won't last forever.
 
You need the header, the arm is fine. Take the phillips screw out, detach the arm, and you can epoxy the post back in the header. Put the arm back on after the epoxy hardens and it will work for a little but, but it won't last forever.
That’s what I was thinking