Does this plug go to the blower motor switch?

Craigesmith52

New Member
Joined
May 20, 2021
Messages
23
Location
32931
So I have this switch but not sure if it is to the blower motor or not. I am having to rewrite to the blower motor and this is my first issue after realizing I have no power to the motor. 1999 6 cylinder TJ

image.jpg


image.jpg
 
What we are seeing is a relay and a relay base that appears to possibly have had salt water intrusion, just a tad green for fresh water.
 
You are dead on about the saltwater intrusion (light term for intrusion, more like a bath) . The part number did show up as a relay so I am hoping I can take it to one of the auto stores and order a matching one. There was a red wire (12 ga) that is hot all of the time that was hooked into this at one time then three other wires. I am not sure if this somehow gets me power to the motor fan but that will play out once I get the new relay. Thanks
 
You are dead on about the saltwater intrusion (light term for intrusion, more like a bath) . The part number did show up as a relay so I am hoping I can take it to one of the auto stores and order a matching one. There was a red wire (12 ga) that is hot all of the time that was hooked into this at one time then three other wires. I am not sure if this somehow gets me power to the motor fan but that will play out once I get the new relay. Thanks

Been there done that (Hurricane Sandy) so I thought it looked familiar.

The FSM's are available free to download in the resource section so you should be able to trace the diagram.