Control arm bushing question

Wajeep

TJ Enthusiast
Supporting Member
Joined
Jan 27, 2021
Messages
124
Location
Wa State
hello, I need to replace this bushing. Its a teraflex 4" lift. This is the Lower Control arm. What is the difference between large frame end and standard. How would I know which one I have/or need? Thanks for any educating your can provide.

IMG_0345.jpeg
 
I looked on the Tereflex website and cannot find your bushing sold separately from their control arm rebuild kits (EXPENSIVE).
As with a lot of Tereflex components; replacement parts could be proprietary.
Hopefully one of the forum members can chime in with a Moog replacement part number.
 
Thanks. Is there a special tool you would recommend to remove the bushing?
A shop press would be the ideal tool.

I've never worked on a TeraFlex arm but have replaced stock cleavites using a ball joint press.
Drill out the rubber, use a hammer and chisel to crush in the sleeve and pop it out. Find the ball joint press adapter that matches the outside diameter of the new bushing and press it in.

Otherwise I'd check with a local machine shop. I doubt they would charge much to swap them out.
 
  • Like
Reactions: DougyintheBushies