The Rubibro special designed by
@AndyG came in today. It is a RC front track bar as the base, a Moog JK bushing for the axle side, and a Moog TRE on the frame side. Totals about $160 when all said and done. Here it is along with a RJ rear track bar courtesy of
@starkey480 . The RJ rear is necessary to play with the tuck and Savvy GTS.
View attachment 379020
My springs come in tomorrow and I already have my adjustable control arms. My plans this weekend are to;
- Install springs.
- Drill out the control arm mounts while doing the spring install.
- Swapping out the arms while I have the axles accessible.
- Install track bars.
- Once I have everything in place, I will measure for shocks, order, and install those.
After this weekend;
- Do a mild tuck with my UCF skid (might get an engine skid for Black Friday…).
- Set control arms for squareness, pinion, and caster.
- Measure and adjust bumps.
- Measure for new DS f+r.
I think at that point I’ll have a rig that handles and performs nicely. No way I’m gonna get this all done in three weeks like I thought but at least I have a well laid out plan with most of the parts on hand.