SilverBullet TJ Enthusiast Joined Oct 16, 2020 Messages 126 Location Pennysltucky Jan 21, 2023 #1 What would cause my tie rod to come in contact with my stabilizer/sway bar mount on my front axle? Is it bent? Just installed a lift and noticed it.
What would cause my tie rod to come in contact with my stabilizer/sway bar mount on my front axle? Is it bent? Just installed a lift and noticed it.
LONGJP2 TJ Expert Joined Aug 11, 2019 Messages 4,884 Location S. Illinois Jan 21, 2023 #2 It looks bent. Probably done to make room for the long stabilizer bolt.
Gollywomper Professional pot stirrer Supporting Member Joined Feb 9, 2019 Messages 3,530 Location Corning CA Jan 21, 2023 #3 Your tie rod is bent back toward the axle most likely.
AndyG Because some other guys are perverts Lifetime Supporting Member Joined Jul 30, 2018 Messages 16,213 Location Alabama Jan 21, 2023 #4 If the axle is not too far forward for some good reason, you need to get a shorter stabilizer bolt and bend the bracket back to where the front of it is vertical.
If the axle is not too far forward for some good reason, you need to get a shorter stabilizer bolt and bend the bracket back to where the front of it is vertical.