Mid-arm LJ Rubicon
- Thread starter sunnysideup_lj
- Start date
OP
Long term yes.
This phase will include, cutting back on weight with the aluminum corners. Cut the frame in front of the mid arm brackets, stretch to the second LJ crossmember. Top it off with some mini boat sides.
OP
And paint it Blue?
Now that would be silly. We both know yellow Jeeps wheel better than the rest
Now that would be silly. We both know yellow Jeeps wheel better than the rest
I always thought it was the White Jeep's that were the best
.
OP
I always thought it was the White Jeep's that were the best
Haha it’s funny how this game works.
I’m excited to see yours out going again. Looks like it’s getting close!
OP
I’ve been looking around for some type of rack/tray to mount above the cargo area behind the back seat. I wasn’t able to find what I was looking for, so I made my own! Sketched up a tray, dimpled the holes and mounted it to the tub last night. Still debating on whether to keep it raw aluminum or coat it black.
The dog bone shaped cut outs are for “e-track” tie down points. This will give me plenty of options when securing items to the tray. I am planning for tools/heavier items down low. Small cooler, lunch box and recovery gear on top.
The dog bone shaped cut outs are for “e-track” tie down points. This will give me plenty of options when securing items to the tray. I am planning for tools/heavier items down low. Small cooler, lunch box and recovery gear on top.
jeepster1407
TJ Enthusiast
OP
Thank you. Yep, Had a local shop burn it and bend the edges.
Thanks! They are still on the back burner. I need to buckle down and finalize the small details. Hearing interest helps motivate to get back to them!
B00mb00m
The Church of Cutting Brakes of Atlas-Front Digs
Supporting Member
Ride of the Month Winner
Dam that turned out nice. I think I might pull my “trunk” out and do the same. I love using those tie downs too.
Did you dimple with the Swag Off-road dies? If so, how did they perform (been looking at them myself for a while now)?
Super awesome tray. Love the raw aluminum. That boy got skillz!
OP
Not sure what brand they are. A buddy has a set he let me use. I used the press method to complete the process.
If laser cutting the dimpled holes, Over size them slightly (.030") This and lots of grease while dimpling will help the die from getting suck in the hole.
OP
Picked up some parts from the laser shop. Hoping I got the bends right so I can get the full lengths done.
I'm going to guess boatsides
That profile does look familiar!
We technically started mine and it's 1 side ready for paint. I just have little free time starting a new business and haven't gotten into the other side yet. There's 4 more projects sitting on my bench I want to get to...