Transfer case skid question

Lonewolf

Lonewolf

TJ Enthusiast
Joined
Mar 4, 2019
Messages
297
Location
Pittsburg, CA
When I purchased my Jeep it already had a slip yoke eliminator and a cv driveshaft installed but it also had these transfercase drop pucks
DD4D8228-6B03-4FA5-9626-6A1347D19A47.jpeg


My question is can I remove then and adjust my control arms to get the correct pinion angle? Or is there something else that I’m missing or needs to be done . Thanks in advance
 
Dump the pucks and adjust the arms.

Strange someone would leave the drop after installing a SYE 🤷‍♂️
 
  • Like
Reactions: JMT
Alex01 said:
Dump the pucks and adjust the arms.

Strange someone would leave the drop after installing a SYE 🤷‍♂️
Click to expand...
I appreciate the quick answer , it seemed so simple I figured I was missing something. The original owner had 4 wheel parts do everything so I keep finding strange stuff done.
 
No problem. I see your just down the road from me. If you ever want an extra set of eyes let me know.
 
Edit: reread that you have a CV driveshaft. Yes, point your pinion at the TC output. Goal is to have the pinion angle under the driveshaft angle by about 1/2 to 1 degree and no more.
 
Top Bottom
Back