Clutch issue after replacement

B

Boomer453

TJ Enthusiast
Joined
Jan 5, 2020
Messages
133
Location
Louisiana
Finished reinstalling transmission after replacing TOB and clutch.
After all is said and done the clutch pedal goes all the way the floor without resistance. It returns when you let off.
Ideas?
 
I'm pretty certain its correct. I just pulled the slave out of the transmission and its in pieces. Stuck my finger in the hole and can feel the cup for the clutch fork about 3/4- 1" in and in line with the hole.
The push rod from the slave cylinder fell inside the bell housing. Going to try to fish it out through starter hole with a magnet
 
  • Like
Reactions: Jerry Bransford
Boomer453 said:
I'm pretty certain its correct. I just pulled the slave out of the transmission and its in pieces. Stuck my finger in the hole and can feel the cup for the clutch fork about 3/4- 1" in and in line with the hole.
The push rod from the slave cylinder fell inside the bell housing. Going to try to fish it out through starter hole with a magnet
Click to expand...
Good luck
 
Top Bottom
Back