CB install

You're welcome! This is actually a pretty good mount for a CB. It is out of the way, and you can mount other stuff off of the mounting bar if you want. I like it.
 
Best CB mount solution out there if you ask me. I love that it's out of the way and you can use it for other stuff as well.
 
Hahaha...a side view would have worked, but thank you! Still trying to decide where to mount one.

I cheated a little...Would have MUCH rather had it overhead, but I got lazy with routing the wires.

CB1.jpg
 
I cheated a little...Would have MUCH rather had it overhead, but I got lazy with routing the wires.

View attachment 3384
Routing the wires is interesting. As noted, I had to go back under the sport bar padding and foreward again with the speaker wires for the sound bar. I really, really thought that the power and ground wires would fit under the trim piece, but no go. It's just to tight. It's a clean install, but there is about ten feet of extra wire to deal with the way I did it. The antenna wire went up the windshield frame and over with no problems and doesn't look horrible. Get some of those stick on wire tie pads, they work well and look half way decent. I'll grab some photos, if anyone is interested.
 
  • Like
Reactions: CasterTroy
Alrighty, here we go!
Radio mounted on Arizona Rocky Road bar. Note double bullet plug that allows radio to be removed easily and stored in lock box for those sketchy parts of town.
Radio mounted.gif

Wiring tucked under padding and run back to roll bar. Note bullet plug for disconnecting wiring when the windshield is folded down.

Connector.gif


Wiring running down roll bar to wire way. That'll get taped and re-zip tied when I get around to it.

Wires down rollbar.gif


wires under dash.gif
 
Last edited:
The antenna ground goes to a rear seat mount bolt. It's a pretty bad setup, but the radio tuned and works just fine. I used some large guage monster speaker wire as a ground strap. Again, not ideal but again it works for the time being.
 
The antenna ground goes to a rear seat mount bolt. It's a pretty bad setup, but the radio tuned and works just fine. I used some large guage monster speaker wire as a ground strap. Again, not ideal but again it works for the time being.
Thank you for the reply. Very helpful.
 
  • Like
Reactions: StG58 and Chris
You're welcome. I've made some compromises with my CB install that keeps it from being perfect. The antenna ground strap is one of them. Good luck with the install and let us know how it turns out.
 
I have mounted my CB on an Arizona Rocky Road mounting bar. I noticed that the wires in the mounting bar rattle. Am I the only one with this problem or did I miss a step? My wife told me to turn the stereo up.
 
I have mounted my CB on an Arizona Rocky Road mounting bar. I noticed that the wires in the mounting bar rattle. Am I the only one with this problem or did I miss a step? My wife told me to turn the stereo up.
@JimT , I can't speak to the wires rattling...mine very well may, but I can't hear them if they do with everything else going on. :)