Allignment help

D M

D M

CEL free! (again)
Supporting Member
Joined
Jul 18, 2019
Messages
1,842
Location
EARTH
Just went to get my jeep alligned with the new currectlync, long story short they couldnt allign it completely and also couldnt get my steering wheel centered due to my adjusting sleeve being shortened all the way already... I know for a fact that my front axle is off due to my front TB being adjusted too far, I need to shorten it about 2 5/8", will an off center axle screw up my steering ?
Heres a pic of what they got
B61AC7B2-43E1-40F8-BF1E-C5BE42A1F426.jpeg
 
How about the tie rod? Is there excessive threads showing on one end or the other? It's a balancing act between the tie rods and the drag link adjustments.
 
bobthetj03 said:
How about the tie rod? Is there excessive threads showing on one end or the other? It's a balancing act between the tie rods and the drag link adjustments.
Click to expand...
Yes it is rather excessive, alot on the driver side, basically none on the side going into the drag link
 
My question still stands though, would an improperly set front adj TB screw anything up?
 
Get your tie rod ends evenly threaded into the tierod. Have them set TOTAL TOE. Then have them turn the steering wheel until the alignment machine shows the individual toes are centered. Then adjust the drag link to center the steering wheel.
 
  • Like
Reactions: D M
The language barrier doesnt help too sadly, I went to another place when I first bought my jeep and they barely spoke english too :(
 
Top Bottom
Back